China Rubber Stairs Strip PricelistChina TPE/PE Wear Strips ManufacturerDecorative Wall Corner Guards FactoryPlastic Sealing Strip FactoriesReinforced Polyester Wear Strip for SaleWholesale Pvc Table Guard For Safety Supplier
Hey folks! We have taken Grant Thompson’s microwave transformer Jacob’s Ladder to the next level with a complete liquid cooling system to give it a 100% duty cycle. We found that Grant Thompson’s design was great, but allowed the transformer to get way too hot. Because of this, we could only run it a few times before having to let it cool down. With our small and inexpensive liquid cooling system modification, the transformer stays nice and cold! Make sure to subscribe for more
Safety Glasses (Safety first!) :
-If you keep you keep your eye out, you should be able to pick one up on the street.
-You probably already have some laying around
Nail (a medium sized one is best):
-Purchase at any local hardware store, or just find one laying around.
Coat Hanger (needs to be made of metal):
-Look in your closet, or pick one up at a local Good Will.
-Anything that holds water works too
Sand Paper (80-120 grit is best):
-Pick up at a local hardware store
-Also pick up at a local hardware store
Liquid Cooling Block:
Mini 12v Pump:
Mini Zip Ties (1,000 of them):
Cordless Rotary Tool:
Power supply for pump:
NOTE: for the power supply, just cut off the plug on the end, and strip the wires. If the pump doesn’t run when the wires are attached one way, attach them the other way, and it should work.