China Slat Wall Panel FactoriesPvc T Molding Profiles Plastic T Edge Strip FactoriesSlotted Decoration Wall Board China ManufacturersWear Resistant Plastic Cover Strip FactoryWholesale Edge Trim Channel Rubber PricelistWholesale PVC Trunking Factories
How To Remove The Battery From A VW Touareg 7L 4XMOTION
This is the quick and easy guide to remove a battery from a 7L Touareg.
You will need a 10 mm spanner and a 10 mm metric socket and driver, 10mm 12 point (Spline Bit) and driver, T25 torx bit and 15 minutes of your time.
Make sure you remove the rear plastic covers of the seat rails first to prevent them from breaking when you lift the seat.
1. First thing to do is run the seat all the way foward and then remove the rear plastic covers of the seat rails.
2. Lift the carpet under the rear of the seat and unclip the rear battery box lid clips.
3. Run the seat all the way back
4. Slide your fingers under the front carpeted trim piece and gently lift it forward. The part that curves up and back under the seat, hooks in three spots to the main seat bracket. You should be able to unclip the piece across the front between the bolt covers and then lift it up and back to un-hook the three hooks under the front of the seat.
5. Remove the right and left bolt covers.
6. Use the 10mm Spline bit and a socket wrench to remove the two seat bolts. (VW recommends these bolts be replaced each time.)
7. Pivot the seat backwards
8. Remove the two front clips holding the battery cover in place.
9. Remove battery box cover
10. Using a 10mm wrench for loosen the battery corner hold down
11. Use a 10 mm spanner to loosen the battery clamps from the battery post.
12. Remove the negative lead first and then remove the positive lead.
13. Remove center battery hold down clamp
14. Remove loosened corner battery hold down clamp
15. Tuck leads beside the battery
16. Lift battery and remove from the vehicle.
17. Installation is the reverse. Use blue threadlock on the two seat bolts and torque to 45 Nm.
1. PVC film
2. PP film
3. Decorative Paper
5. Self-adhesive film
THAI CHI ENTERPRISE CO., LTD. was established in 1994, Kaohsiung city, Taiwan. We have been manufacturing many printed paper, PP, PVC and PET film with interior design applications for wall coverings and speaker box, printing resin-coating doubling laminate, slitting sales, etc. Our efforts to improve technology, upgrade quality, and enhance operating efficiency were recognized by its acquisition of IS0 9001 and ISO 14001 certification in 2005. Our products meet not only the standards of Japan but also the world, such as ROHS and REACH. Today about 20% of THAI CHI’s products are marketed in Taiwan and the rest are exported, such as Malaysia, Japan, Germany, China, Vietnam, Philippines and so on. In Japan, we sell our products to a variety of companies, such as YAMAHA、ROLAND、SHARP、PANASONIC and so on. Besides continuing to cultivate the existing markets, THAI CHI also plans to expand the markets into Europe, the Middle East, and Latin America. We want to become a global company to ship our products all over the world. We hope to become one of the major suppliers of the world for surface treatment and finishing materials.
泰綺實業股份有限公司在台灣高雄於1994年成立。我們一直不斷製造不同類型印刷, 比如裝飾紙，PP膠皮, PVC膠皮以及PET膠皮。適用於室內裝潢, 喇叭箱、家具、建材、廚具、天花板等等。我們一直非常努力增強科技、提升品質以及提高經營效率並在2005年同時取得國際ISO9001以及ISO14001認證。同時不僅符合日本安規也符合ROHS及REACH規範。目前我們的產品80%外銷, 其餘20%供應國內市場。外銷的國家如下，馬來西亞、日本、德國、中國、越南、菲律賓等。在日本，一些著名的品牌大廠如YAMAHA、ROLAND、SHARP、PANASONIC等。在銷售方面，除了鞏固已有的市場外，更積極開拓歐洲、中南美洲以及中東市場。希望泰綺的產品在全界都可以廣泛使用, 提供更優質的印刷產品。
泰綺實業股份有限公司 THAI CHI ENTERPRISE CO., LTD.