China Clear Laminated Edge Strips FactoriesChina Edge Banding Trim Strip SupplierChina Rubber Strip(TPR PE&TPE Materials Or Custom As The Request) ManufacturerChina Solid NFT PVC U Channel FactoriesWholesale PVC/PE Corner Protectors For Walls for SaleWholesale Reinforced Polyester Wear Strip For Food Machine Parts Manufacturers
This video explains the correct method of applying self adhesive anti slip tape from Stop Slip Limited. Our Anti Slip Tape is manufactured in the UK, a cost effective, quick and easy to apply slip prevention product. Our tapes are ex stock so we can normally organise next day deliveries.
For best results follow the instructions below to ensure maximum performance in all environments.
1) Material Storage
Ensure the material is kept in dry, warm conditions in the original protective packaging.
2) Surface Preparation
A clean, dry surface is essential. Use an IPA (Isopropyl Alcohol) cleaner to remove all
surface contaminants (paint flakes, etc) — DO NOT use methylated spirits / petrol / lighter
fluid etc as these leave behind a thin, greasy residue. Ensure prepared surface is above
10°C. Apply a small amount of the IPA Cleaner to the surface using single sweeps. Do not re-wipe over
the area that has been cleaned with the dirty cloth.
3) Porous Surface Sealing
Porous surfaces must be sealed prior to application to prevent water attacking the
adhesive. Toluene based primers are ideal – we supply a product for this job. Apply a thin
coat to the cleaned surface using a paint brush, then leave to dry.
4) Tape Application
Cut tape to the required dimensions. Peel back part of the release liner then press the
adhesive firmly onto the prepared surface, and slowly keep peeling back the liner while
applying the tape. Try to ensure that the tape is not taut. Our Conformable Tape can be
gently firmed into position using a rubber mallet to help the tape fit into the contours of the surface.
Once applied, press tape down firmly using even pressure (decorating rollers are
excellent for this). We recommend sealing the edges using ‘edge fix’ as this will extend
the life of the product. Only apply a very small bead down the edges after the tape has been applied.
If correctly applied, the new anti-slip surface can be walked on straight away, though you
will get maximum benefit from the adhesive system after 48 hours.
19 Lagoon Street, Barrack Heights
Jack Scofield and Ray White Shellharbour City are proud to present for sale 19 Lagoon Street. This is your opportunity to secure a property on the ever popular East Side of Barrack Heights with unbelievable lifestyle opportunities all within a few minutes walk. Stroll to the playground, Little Lake, your choice of many beautiful well renowned beaches, Shellharbour Village with its boutique restaurants and cafes, clubs, pubs and not to mention one of the best walking/cycle tracks the South Coast has to offer.
The home itself offers 4 good size bedrooms, huge open plan air conditioned kitchen/dining/living area with high ceilings, features brick and sandstone walls and polished timber floors. The timber kitchen has ample storage, gas cooktop and Island bench with seating and the main bathroom boast a double vanity and corner spa. The internal laundry features a separate toilet. Electric roller shutter on all West …
Ray White Shellharbour City