Short Lead Time for anti-aging PC extrusion profile to Ethiopia Importers

Short Description:

Description: -.Quality advantage: Select international material brands of Germany and Japan. ♦ Professional experience of the same series materials for 16 years to ensure material’s stability. ♦ Better quality for added anti-aging additive in the process. ♦Five full-parametric strictly test and a fully parametric sampling  from production to delivery and to ensure product quality standards conforms as the standard request. ♦ Strictly do as the customers’ special requirement standards to...


Product Detail

Product Tags

Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for Pvc Slat Wall Panel Factories , Wholesale Slot wall Melamine Slotted Board Factories , PVC TPE Counter-top Corner Protectors/Guard China Factory , We warmly welcome you to establish cooperation and create a bright future together with us.
Short Lead Time for anti-aging PC extrusion profile to Ethiopia Importers Detail:

Description:

-.Quality advantage: Select international material brands of Germany and Japan.

Professional experience of the same series materials for 16 years to ensure material’s stability.

Better quality for added anti-aging additive in the process.

Five full-parametric strictly test and a fully parametric sampling  from production to delivery and to ensure product quality standards conforms as the standard request.

Strictly do as the customers’ special requirement standards to guaranteed the products quality.

 

-Technology advantage:

Special cooling process to reduce the stress of profile products.

 

-Production advantage:

extrusion production lines

♦  Factory covers 20,000 square meters

♦  10 extrusion production lines

♦  Product structure design capability

♦  CAD / CAM

♦  Free sample can be provide

♦  Independent mold design capability

♦  Commissioning production capacity

♦  Rich inventories support large or small quantities

♦  Materials development

♦  Quality Control by 24 hours

Outside Diameter 15mm 26mm 30mm(Custom-made is available)
Material PC (Polycarbonate)
Color Transparent/Translucent/Milky White/Colored
PC Cover Type Conventional/Ellipse/Flat(Custom-made is available)
Length 100mm,300mm,800mm,1200mm,2000mm or custom
Commend PCB Size According to specific demand
Commend Driver Size Driving outlay or both ends upward
Carton Size as per requirement
Tube Type T5 T8 T10 (Custom-made is available)
Feature standard 100%  eco- friendly,ISO9001:2009/SGS
MOQ 3000m or custom as the request.

Product detail pictures:

Short Lead Time for
 anti-aging PC extrusion profile to Ethiopia Importers detail pictures


Reliable quality and good credit standing are our principles, which will help us at a top-ranking position. Adhering to the tenet of "quality first, customer supreme" for Short Lead Time for anti-aging PC extrusion profile to Ethiopia Importers, The product will supply to all over the world, such as: Philippines , South Korea , Sao Paulo , With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.



  • 14,18,The Vario roof of the SLK is leaky.|||
    19,31,Apply special lubricant to all|suspected leaky areas.||
    32,38,Carefully check the vehicle for leaky|areas from the outside.||
    39,43,Pay particular attention to checking the bar |seal between the front and rear side window.||
    44,47,Ensure that the gap dimension is correct!|||
    48,50,If not, water can enter here.|||
    51,53,Adjust the front window if necessary.|||
    54,57,Also check the gap dimensions|at joint 1 and 2.||
    58,62,Joint 2 is correct.|||
    63,71,Joint 1 is relatively large, meaning that|water can enter.||
    72,80,Check vehicle for damp areas.|Carefully feel the seat upholstery and carpet.||
    81,84,Have a large quantity of dry towels ready.|||
    89,94,A rain test will show you where|the leaks are actually located.||
    96,99,Spray water on suspected leaky areas|for at least five minutes.||
    104,109,Ideally, look for leaks from the inside|of the vehicle.||
    110,114,Your suspicions are confirmed – water|is entering at joint 1.||
    115,121,If no water enters after five minutes,|keep spraying the vehicle for at least |20 minutes more.|
    122,125,The water may need time|to penetrate into the vehicle interior.||
    127,130,The rain test can also be performed using|the towels mentioned earlier.||
    131,138,Place sufficient towels on the seat and |footwell so that you find all of the leaks.||
    140,145,Perform a rain test again.|||
    147,151,After 20 minutes, check whether and where|water has entered.||
    152,156,Before opening the door, dry off|the water from the outside.||
    160,165,As previously, water has again entered|at joint 1.||
    170,173,The repair can now be performed|in the workshop.||
    174,180,The repair should also be performed if |the contact pressure of the two seals |on the joint is too high.|
    180,183,The rubber seals can ripple and|water can enter.||
    184,189,Here, the contact pressure of the seals at|joint 1 is insufficient and must be corrected.||
    190,195,Dry the entire roof area including|rear window and side windows.||
    196,200,The roof must be in the intermediate position|for this.||
    201,205,A support is used to ensure that|the roof does not suddenly collapse.||
    206,210,Remove the key to depressurize|the hydraulic components.||
    213,218,Remove the four screws from the front section.|||
    223,228,Lever out the five clips on the back|using a plastic wedge.||
    231,236,The headliner is now loose and can be|removed downwards.||
    240,246,The seal through which the water enters |the interior compartment is now accessible.||
    247,250,Loosen the screws holding the seal|to the weatherstrip rail. ||
    251,255,The seal can now be moved and|optimally positioned.||
    256,262,This prevents water entry at the joints.|||
    263,267,Apply some force to pull the seal|into the desired position.||
    274,280,Retighten all screws.|||
    285,288,Check the seal for correct seating.|||
    289,306,To do so, remove the support|and close the Vario roof.||
    308,315,Check the leaky area on joint 1|again with the roof closed.||
    316,319,The gap dimension is correct and the seals|are touching each other cleanly.||
    320,326,Here are the two gap dimensions again |for comparison: Before the repair at the top, |after the repair at the bottom.|
    327,330,Perform another rain test|just to make sure.||
    332,338,Note: When reinstalling, pay attention to the |two catch tabs on the side of the headliner.||
    340,353,These must engage cleanly otherwise|the headliner will not be correctly seated.||
    355,360,Finally, turn up the two lower sealing lips|towards the front.||

    Related Products

    WhatsApp Online Chat !