China Window Seal Rubber SupplierRectangular NFT Channel China SupplierRubber Molding FactoryStep Nosing Edge Trim ManufacturerWholesale Roller Door Cabinet SupplierWholesale Window Seal Rubber
Sorry for the shitty video, I decided to make it halfway through the removal and phone batt was at 3%.
THIS PROBABLY WILL NOT WORK FOR YOU GUYS THAT HAVE THE VERTICAL SLATS IN YOUR GRILL, SINCE YOU WON’T BE ABLE TO PRY AGAINST THEM.
TOP 4 clips:
Loosen the 4 retention clips on the black horizontal part that connects the grill assembly to the car, USE A FLATHEAD OR BUTTER KNIFE TO PUSH THE CLIPS FROM THE BACK SIDE OR YOU’LL MESS THEM UP!!! The grill assembly will become “loose.” This is the part you see my butter knives/screw drivers sitting on.
TOP 8 CLIPS:
Pop out as many of the grill cover clips, on the top side, as you can reach from behind using some sort of tool, flathead, butter knife, etc. THEN begin working the butter knives between the black plastic and chrome grill to pop the rest of the clips. They release pretty easily. YOU’LL WANT TO PRY WITH 2 AT A TIME TO SPREAD OUT THE FORCE!!!
BOTTOM 6 clips:
Grab the bottom corner like I did in the video and pull pretty damn hard. It will hurt your fingers since its sharp, but won’t cut you. You have to pull like that to get both the far left and right clips. The other 6 should pop out with the bicycle tire tools. Once you work from one side to the other, and only have the farthest clip left, go ahead and pull out the chrome assembly so the clips are free. This will help it come off easier.
Ik this box is not the best looking but it was originally for two subs and I cut it in half but whatever it’s temporary and the pot hold I believe is 3 1/4in rocking that audiopipe with Soundqubed Hds315 1200rms watts 2400 max peak I will be making a new box for this sub and amp later one don’t forget to comment rate and hit that sub button for more