China Extrusion Plastic Protective Corner Guards FactoryChina Roller Shutter Cabinet Doors ManufacturerCorner Protectors Strip China ManufacturersPvc Slot Cover For Aluminum Extrusion Profiles FactoryWear Polyurethane Strips ManufacturersWholesale Edge Protection For Aluminum Extrusion Profiles Supplier
In this video, Blake takes you step by step in how to assemble your brand new Bintelli B1 Electric Bicycle.
Visit us at www.BintelliBicycles.com to purchase a new bicycle or to find a dealer near you! If you’re interested in becoming a Bintelli dealer, please fill out the application that can be found on our website. Thank you for watching!
• Remove all strapping and protective wrapping.
• Handle bars:
o Place bushing on the handle bar tube and twist to get a tight seal.
o Insert the handle bar stem into the tube.
o Confirm that it does not go past the indicator.
o Ensure the handle bar lines up with the forks.
o Tighten all bolt with the 5 and 6 mm allen wrenches
o Remove acorn bolts and washers from the end of the forks.
o Insert the wheel between the forks ensuring the break disk is on the left lining up with the break caliper .
o Replace acorn bolts and washers-tighten.
o Remove bolts with 4mm allen wrench.
o Make sure you remove the bolt completely so you can place the headlight through the front of the bolt before you slide the fender through from behind.
o Slide the fender through and tighten bolts.
o There will be left and right indicators on the pedal stems.
o Use the 15 mm wrench to tighten.
o The left pedal will be reverse thread so you will tighten it counter-clockwise.
o Insert the tapered end of the seat rod into the body of the bike.
o Lock the seat in place at the appropriate height ensuring it is past the minimum insertion line.
o Attach the rear reflector to the seat stem using the provided rubber strips.
• Water bottle- mount bracket to frame using the bolts that are already in the frame
o Use 4mm allen wrench to tighten down.