China Hydroponic Channel for SaleChina U Molding Plastic Trim SupplierDecorative Cable Trunking China SupplierPlastic Tambour Door For Office File Cabinet FactoryRectangular NFT Channel China ManufacturersWholesale Rubber Stairs Strip for Sale
Watch the full episode: https://www.youtube.com/watch?v=fMEAKraoh6c&index=7&list=PLkJADc1qDrr-U3jevgVkJt9YXYy_ZfHau
This Old House general contractor Tom Silva replaces a pair of sidelights on a front door with new, insulated ones. (See below for shopping list, tools, and steps.)
Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse
Shopping List for How to Replace Sidelights on a Front Door:
- Insulated-glass sidelights
- Acrylic-latex caulk, for weatherproofing the sidelights
- Exterior-grade primer and paint
Tools List for How to Replace Sidelights on a Front Door:
- Utility knife, for slicing through dried coats of paint
- Stiff-blade putty knife and flat bar, used to pry off stop beads
- Circular saw, for cutting new sidelights to length
- Hand plane, used to trim new sidelights to width
- Air compressor and pin nailer with 1-inch pins, for installing stop beads
- Caulk gun
Steps for How to Replace Sidelights on a Front Door:
1. From inside, use a utility knife to slice through the old paint along the outer edge of the stop beads, and in between the stop beads and sidelight sash.
2. Then, use a stiff-blade putty knife and flat bar to carefully pry the stop beads from around the sidelight sash.
3. Move outside and use the utility knife to cut through the paint bead around the exterior of the sidelight.
4. Use your fist to gently tap the wood frame of the sidelight to free it from the opening.
5. If your front door has two sidelights, repeat Steps 1 through 4 to remove the second sidelight.
6. Trim the new sidelights to fit the existing openings. Cut them to length with a circular saw, and trim them to width with a hand plane.
7. Brush a coat of exterior-grade primer onto all four edges of the sidelights.
8. Apply a continuous bead of acrylic-latex caulk around all four sides of one opening and press the sidelight into place.
9. Reinstall the original stop beads around the inside of the sidelight. Secure the stops with a pin nailer and 1-inch pins.
10. Repeat the previous two steps to install the second sidelight.
11. Prime and paint the inside and outside surfaces of both sidelights.
Follow This Old House and Ask This Old House:
From start to finish, learn how to properly install your Legacy Click Luxury Vinyl Planks & Tiles flooring.