China Kitchen Roller Shutter SupplierChina Pvc Cabinet Edge Trim SupplierRubber Seal for SaleRubber Strips With Adhesive Backing China ExporterWholesale ABS Plastic Strip&ABS Seal Strip&ABS Edge Strip ManufacturerWholesale Flexible Trim Edge With Adhesive Tape Manufacturer
With these light bars, I replaced 400 WATTS of incandessant bulbs with 36 WATTS of LED’s, with no noticable difference in brightness.
There is a part 2 for connecting power to the back of the console
DIY wireless charging Chevy Truck $13
This is the one that i used in this video http://amzn.to/2rp8yn1
If you have any questions feel free to ask them
here is a link to the charger that i used you might even find it cheaper.
Link: http://amzn.to/2rp8yn1 (Choetech Charging Pad)
if your phone has wireless charging capabilities this will work.
also if you want to skip the step with the tie wrap i found out that you can just pull the under side off the console by prying them apart there are no screws that hold them together. see the next video and you can see where i took it off. Part 2
i want to give credit to bulajim for the grate tips that were provided. thanks bulajim for taking the time to support me.
a couple tips…I got the same charger but it was a bit big compared to this video…I trimmed the board with nail clippers. also, the charger doesn’t allow the rubber mat to go through one of the holes in the tray. had to trim off the larger rubber “fin” on it but the other fin will keep in place when raising lid. trimming the plastic of the mini USB connector is key to making it fit too…I protected with electrical tape once it was gone. mine does charge thru a case…Samsung s7 with speck candy shell case…doesn’t charge very fast but does charge.