Goods high definition for High gloss edge banding for particle board to Hamburg Factory

Short Description:

High gloss: high gloss pvc edge banding  Materials: PVC, ABS, Veneer, melamine, etc.  Specifications: width 18mm~84mm  Thickness: 0.3mm~3mm high gloss pvc edge banding PVC edge banding is the most widely used edging product in the furniture industry with outstanding features of low cost, easy application, fantastic decoration, non-color variation after trimming and polishing, high flexible effects ,superior durability and wear ability, stain and chemical resistance, etc. We provides a wide ra...


Product Detail

Product Tags

"Quality first, Honesty as base, Sincere service and mutual profit" is our idea, in order to develop continuously and pursue the excellence for Pvc Hydroponics China Factories , Solid edge banding , Light Flexible ABS Roller Shutter Doors For Office File Cabinet China Manufacturers , We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.
Goods high definition for High gloss edge banding for particle board to Hamburg Factory Detail:

High gloss:

high gloss pvc edge banding 
Materials: PVC, ABS, Veneer, melamine, etc. 
Specifications: width 18mm~84mm 
Thickness: 0.3mm~3mm

high gloss pvc edge banding PVC edge banding is the most widely used edging product in the furniture industry with outstanding features of low cost, easy application, fantastic decoration, non-color variation after trimming and polishing, high flexible effects ,superior durability and wear ability, stain and chemical resistance, etc.

We provides a wide range of surface finishes for customers selection, including Matt finish, Gloss finish, High gloss finish, Embossed texture finish, etc 

 

We provides a wide range of surface finishes for customers selection, including Matt finish, Gloss finish, High gloss finish, Embossed texture finish, etc

 

 

Thickness

0.40mm to 3.0mm, customized sizes can be ordered

Width

12mm to 630mm,customized sizes can be ordered

Color

Unicolor, Two color, Wood grain Color. We can also develop your customized designs and colors.

Surface Finish

Matt, Glossy, High Glossy, High Glossy with metallic spangles, Smooth or Embossed Finish

Features

The product is made from highly selective PVC resin . We have more than one thousand different 

colors and wood grain designs available to help you achieve different styles and coordinate different 

colors of your products. We are also capable of matching your required designs, colors and quality 

standards according the samples provided. The product is characterized by high wear resistance ,

strong bonding strength, and color remaining the same as surface after trimming, polishing or bending.

MOQ

3000 meters per color or as per request of customers

Packing 

100m/roll, 200m/roll, rolls in carton, or according to your requirements.

Customized design, logo, words can be done on cartons, labels or products.

Delivery Time

10-20 days after receipt of 50% advance payment.

Payment

T/T, L/C

Usage 

It is used for furniture, wooden doors, cabinets etc.

Supply Capacity

4 containers per day, on-time delivery is guaranteed. 

 


Product detail pictures:

Goods high definition for
 High gloss edge banding for particle board to Hamburg Factory detail pictures


We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for Goods high definition for High gloss edge banding for particle board to Hamburg Factory, The product will supply to all over the world, such as: Casablanca , Madrid , Russia , Although continuous opportunity, we have now developed serious a friendly relationship with many oversea merchants, such as ones through Virginia. We securely assume that the merchandise regarding t shirt printer machine is often good through a great number of having its good quality and also cost.



  • I invented the Bow Blower, a combination of the bow drill and forge blower to make a device that can force air into a fire while being easy to construct from commonly occurring natural materials using only primitive technology. I began by fanning a fire with a piece of bark to increase its temperature. It is this basic principle I improved on throughout the project.
    Next, I made a rotary fan from two pieces of bark that slot together at right angles to each other to form a simple 4 bladed paddle wheel about 20 cm in diameter and 5 cm tall. The blades of the fan were not angled and were designed only to throw air outwards away from the axle when spun. The rotor of the fan was made by splitting a stick two ways so it formed 4 prongs. The fan was then inserted into the prongs and the end lashed to hold it in place. Spinning the fan rotor back and forth between the palms of the hands fanned the fire. But only some of the wind generated by the fan reached the fire. The rest of it was blowing in other directions, effectively being wasted.
    So I built a fan housing from unfired clay to direct the air flow into the fire. This was basically an upturned pot with a hole in the top, a spout coming out of the side. The housing was about 25 cm wide and 8 cm tall. The hole in the top and the spout were both about 6 cm in diameter so that the air coming in roughly equalled the air coming out. The base of the fan rotor sat in a wooden socket placed in the ground to make it spin easier and the top of the rotor protruded from the hole in the top of the housing.
    Now when the fan spun, air entered the hole in the top of the housing and exited the spout in the side. Importantly, it doesn’t matter which way the fan spins, air always goes into the inlet and out the spout. Air is thrown out towards the walls of the housing and can only leave through the spout while the vacuum in the centre sucks new air into the housing through the inlet. A separate clay pipe called a tuyere was made to fit over the spout to direct air into the coals. This was done because the pipe that touches the fire can melt away so it’s better to make this part replaceable.
    Instead of making a large wheel and belt assembly to step up the speed of rotation, I opted for a 75 cm long bow. I made a frame to hold the rotor in place consisting of two stakes hammered into the ground with a socketed cross bar lashed on to hold the top of the rotor. I made bark fibre cordage and tied the end to a stick. I then looped the cord around the rotor and held the other end in the same hand holding the stick. I then pushed and pulled the bow causing the rotor to spin rapidly, forcing air into the fire.
    I made a simple mud furnace for the blower. Then I collected orange iron bacteria from the creek (iron oxide), mixed it with charcoal powder (carbon to reduce oxide to metal) and wood ash (flux to lower the melting point) and formed it into a cylindrical brick. I filled the furnace with charcoal, put the ore brick in and commenced firing. The ore brick melted and produced slag with tiny, 1mm sized specs of iron through it. My intent was not so much to make iron but to show that the furnace can reach a fairly high temperature using this blower. A taller furnace called a bloomery was generally used in ancient times to produce usable quantities of iron and consumed more charcoal, ore and labour.
    This device produces a blast of air with each stroke of the bow regardless of whether it is pushed or pulled. The bow makes it possible to operate the blower without using a complicated belt and wheel assembly used in traditional forge blowers. There is a brief pause at the end of each stroke where the fan stops to rotate in the other direction, but this is effectively no different to the intermittent blast of a double acting bellows of Europe or box bellows of Asia. The materials used (wood, bark, bark fibre and clay) are readily available on most continents. No leather, valves or precisely fitted piston gaskets are required as with other types of bellows. The cords for this device wear out often so a number of back up cords should be kept handy for quick replacement. In summary, this is an easy to make device that solves the problem of supplying forced combustion air required for high temperature furnaces and forges.

    WordPress: https://primitivetechnology.wordpress.com/
    Patreon page: https://www.patreon.com/user?u=2945881&ty=h
    I have no face book page. Beware of fake pages.

    Related Products

    WhatsApp Online Chat !