Good Quality pvc electrical cable trunking for Hongkong Manufacturer

Short Description:

Product Introduction:   1).Material:  Making of PVC Plastic 2).Size: Custom: 3).Appearance: Semi-circle, Color nice and beautiful,Decent packaging 4).Use: For internal wiring,protecting the wire under 1200v 5).Effect: After using,wiring easily and trimly,installing reliably,and is convenient for maintaining and searching and exchanging 6).Lifetime:  Normal use life can be up to 50 years   Features:    1). Toughness:         If you bend ,can not be easier to break 2).Hardness:           Under...


Product Detail

Product Tags

Our pursuit and company goal is to "Always satisfy our customer requirements". We continue to develop and design superior quality products for both our old and new customers and achieve a win-win prospect for our clients as well as us for Wear Strip China Manufacturer , China Pvc Plastic Roller Shutter Doors For File Cabinet Manufacturers , China PVC Slat wall Panel for Sale , We sincerely welcome all guests to set up business relationships with us on the basis of mutual benefits. Please contact us now. You will get our professional reply within 8 hours.
Good Quality pvc electrical cable trunking for Hongkong Manufacturer Detail:

Product Introduction:

 

1).Material:  Making of PVC Plastic

2).Size: Custom:

3).Appearance: Semi-circle, Color nice and beautiful,Decent packaging

4).Use: For internal wiring,protecting the wire under 1200v

5).Effect: After using,wiring easily and trimly,installing reliably,and is convenient for maintaining and searching and exchanging

6).Lifetime:  Normal use life can be up to 50 years

 

Features  

1). Toughness:         If you bend ,can not be easier to break

2).Hardness:           Under pressure ability, high impact resistance

3).Fire-resistance:  Flame-retardant pvc resin,highly combustion-retardant,quickly self-extinguishing

4).Corrosion resistance : moisture, acid and alkali resistance,, assuring a lower maintenance cost and a longer performance life

5).Non-conductive:     excellent electricity insulation, which resist 25kv voltage , assuring a safe system

6).Installation: easy to open and close ,convenient push-pull,installed with solvent cementing and threading joinin


Product detail pictures:

Good Quality
 pvc electrical cable trunking for Hongkong Manufacturer detail pictures


With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of Good Quality pvc electrical cable trunking for Hongkong Manufacturer, The product will supply to all over the world, such as: Spain , Lithuania , Thailand , We taking advantage of experience workmanship, scientific administration and advanced equipment, ensure the product quality of production, we not only win the customers' faith, but also build up our brand. Today, our team is committed to innovation, and enlightenment and fusion with constant practice and outstanding wisdom and philosophy, we cater to the market demand for high-end products, to do professional products.



  • Visit http://tufdek.com/ to Learn More!

    Installing Tufdek waterproof vinyl decking Products – Complete Instructional Video

    Welcome to the Tufdek Installation Video. This will show you how to properly install Tufdek vinyl deck flooring using easy-to-follow, step by step directions. Tufdek is designed to be the strongest, longest lasting waterproof deck surface in the industry and will outperform all other waterproof decking products.
    PVC is one of the most versatile materials in the building industry.
    The deck surface must be clean, dry, and smooth before installation. All imperfections must be removed, sanded and filled with floor filler, otherwise it will show through the finished vinyl deck covering. Always check temperature and moisture levels prior to vinyl deck installation. Sand the entire deck surface. Any imperfections in the deck surface must be properly patched and sanded including knot holes and plywood joints. Prior to the vinyl deck installation, all necessary Tuf-Clad metal deck flashings must first be installed. The flashings must be installed at or below the level of the deck surface and sloping to the outside edge. Galvanized flashing can be installed over any gaps between your deck and the wall. Once the final deck sanding is complete be sure to thoroughly sweep or blow off the deck surface; it must be completely free of debris. When laying out the vinyl decking sheets, it is important to allow enough material to overhang the deck edges by 3 inches, and run up the wall by 6 – 8 inches, plus allow for overlapping seams of 1.5 inches on multiple vinyl sheets. Start with the first sheet along the decks outer edge, parallel with the edge’s flashings. Carefully roll out the vinyl deck flooring and accurately cut around any objects like posts. Once the first panel is properly cut in place you can then lay out the second panel, allowing for a 1.5 inch overlap of the first sheet.
    Tufdek roll on latex is then applied using a Tufdek professional roller sleeve. Apply the vinyl decking adhesive onto the plywood deck surface using a one sided transfer application. Be sure to apply the vinyl deck adhesive with a consistent rate of coverage.
    Start by folding back the Tufdek vinyl decking sheet. Apply the roll on adhesive to the deck surface and then fold the vinyl decking back over the adhesive, while it is still wet, allowing to the clue to transfer to the back of the vinyl sheet. The vinyl decking is then pushed into the adhesive to remove any wrinkles or bubbles. Repeat the same process for the other half of the vinyl decking. For vertical application such as up a wall, apply the vinyl adhesive to the back of the vinyl decking as well as to the wall. Allow the adhesive to become tacky before applying the vinyl to the wall. Place stables along the top edges of the vinyl. Once all the major vinyl deck sheeting is in place you can work on the other various details such as door sills and posts. Hot air welding of two vinyl decking sheets is done by placing the hot air welder between the two vinyl sheets at the seam and then melting the 2 pieces together using a welding roller to apply pressure. To hot air weld the Tufdek vinyl decking to Tuf-Clad PVC metal flashings, place the tip of the welder between the 2 materials while using the roller to press the 2 surfaces together. Use Tuf-Guard pre-made PVC corners around wooden posts and heat weld them to the deck surface. Making your Tufdek vinyl deck surface completely waterproof depends on the integrity of the seams.

    For more information about Tufdek waterproof vinyl deck products visit our website at http://tufdek.com



    Four Seasons gardening presentation presented by Jeff Kindhart, Senior Research Specialist in Agriculture, on October 7, 2014.
    This session provides a brief overview of some of the hydroponic systems that are suitable for small scale production. In addition, it will provide an outline to success for those interested in starting a small scale hobby hydroponic project. It will cover aspects such as fertilizer selection, timing, and most suitable crops for use in a home hydroponic system.

    Related Products

    WhatsApp Online Chat !