Light Flexible Pvc Roller Shutter Doors For Furniture&Kitchen China SupplierPE/TPE/TPR/PP/PVC Plastic Edge Trim ManufacturerPlastic Roller Cabinet Shutter Door FactoriesShower Door Rubber Seal FactoryTable Plastic Furniture Edge Trim PricelistWholesale TPE/PE Wear Strips
KCM—email@example.com—Refrigerator Door Foaming Drum
The door foaming line is a 7-station rotary device used for the foaming of refrigerator door. The working process is as follows:
After the door shell and liner are put into the die, the die jointing cylinder lifts the lower die carrier to the horizontal position, the mixing head self filler performs automatic filling according to the preset data in the process. After the filling, the carriage retreats to the original position. The rotary oil cylinder starts to operate and bring the turning mechanism to rotate. During rotation, the lower die carrier closes after rolling along the set smooth rail. When rotating in place, the positioning oil cylinder begins to position. Meanwhile, the die locking oil cylinder locks the die, the die jointing oil cylinder rises,; the rotary oil cylinder returns after the upper positioning oil cylinder retreats, the die unlocking oil cylinder unlocks the die when the die jointing oil cylinder rises in place, the lower die carrier opens the die when the die jointing oil cylinder falls to the original place. Then, an operator can take out the finished product and put in door shell and liner, which shows the completion of one operation cycle.
This door foaming line takes a few space, much less money, but have high manufacture efficiency.
KCM MACHINERY MANUFACTURING CO., LTD
Mr. Leo Zhang
Mobile Phone: +0086 15855019595
Tel: 0086 550 3088037; Fax: 0086-550 3088029
SKYPE: leizhang112; QQ: 454656098;
Address: No. 688, ZIWEI South Road, CHUZHOU City, Anhui Province, China.
Lots of projects call for some kind of edge banding. The edge banding might be thin pieces you’re applying to European style cabinet cases, slightly larger pieces you’re applying to the edge of a shelf to make it more rigid, or exceptionally thick pieces being added to a bar or table edge. All of these instances call for clamping strategies that allow you to successfully pull the edge band tight, and this can be a challenge. Here are gluing and clamping wood solutions for a variety of edge band applications, some of which include use of an edge clamp, while others use bar clamps.
DIFFERENT SOLUTIONS FOR DIFFERENT APPLICATIONS
Thin edge banding that’s being used on a Euro style cabinet has much different clamping requirements than heavier edge banding that’s being used on a table or bar top. Add to the mix the clamping problem of spanning an especially wide board that you’re edge banding, or a curved edge. These applications really allow an edge clamp to shine, and show how it’s the right tool for the job. Regardless of the edge banding or edge clamp application you’re up against, there’s a solution that will help you make your woodworking project come out great.
ONCE THE BANDING IS ON
Now that you’ve seen some great ways to get edge banding onto your project parts, you need to know the next step. Edge banding is typically applied over size, and trimmed later. That means that, once the glue is dry, you need to know how trim edge banding.
For more information about Bessey clamps visit http://www.besseytools.com or call (800) 828-1004.
Learn more: http://bit.ly/2kqpyoC