Factory wholesale price for Solid edge banding for cabinet for Florida Manufacturers

Short Description:

Solid Color Description:   1.Excellent product quality : no bubbles , and smooth appearance and very good  flexibility. 2. Its performance will not change even the temperature is -25℃ or 400℃. 3.No whitish while trimming .  4.Any color is available 5.Appropriate for office furniture, household furniture, kitchen cabinet ….     Thickness 0.40mm to 3mm, customized sizes can be ordered Width 12mm to 630mm,customized sizes can be ordered Color Solid color, Two color, Wood grain ...


Product Detail

Product Tags

We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Roller Door Cabinet China Manufacturers , Pvc Cabinet Edge Trim China Factories , U Molding Edge Strip Manufacturers , Looking to the future, a long way to go, constantly striving to become the all staff with full enthusiasm, one hundred times the confidence and put our company built a beautiful environment, advanced products, quality first-class modern enterprise and work hard!
Factory wholesale price for Solid edge banding for cabinet for Florida Manufacturers Detail:

Solid Color

Description:

 

1.Excellent product quality : no bubbles , and smooth appearance and very good  flexibility.

2. Its performance will not change even the temperature is -25℃ or 400℃.

3.No whitish while trimming . 

4.Any color is available

5.Appropriate for office furniture, household furniture, kitchen cabinet ….

 

 

Thickness

0.40mm to 3mm, customized sizes can be ordered

Width

12mm to 630mm,customized sizes can be ordered

Color

Solid color, Two color, Wood grain Color. We can also develop your customized designs and colors.

Surface Finish

Matt, Glossy, High Glossy, High Glossy with metallic spangles, with Smooth or Embossed Finish

Features

The product is made from PVC resin of the highly recognized brands. We have more than one thousand different colors and wood grain designs available to help you achieve different styles and coordinate different colors of your products. We are also capable of matching your required designs and colors according to the samples provided. The product is characterized by high wear resistance, color remaining the same as surface after trimming and polishing, and strong bonding strength.

MOQ

3000 m per color or as per request of customers

Packing

100m/roll, 200m/roll, rolls in carton, or according to your requirements.

Customized design, logo, words can be done on cartons, labels or products.

Delivery Time

2-3 weeks after receipt of payment.

Payment

T/T, L/C

Usage

It is used for furniture, wooden doors, cabinets etc.

Supply Capacity

4 containers per day, on-time delivery is guaranteed.

 


Product detail pictures:

Factory wholesale price for
 Solid edge banding for cabinet for Florida Manufacturers detail pictures


Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for Factory wholesale price for Solid edge banding for cabinet for Florida Manufacturers, The product will supply to all over the world, such as: Greece , New York , Slovenia , Insisting over the high-quality generation line management and prospects guide provider, we've made our resolution to offer our shoppers using the initially stage purchasing and soon after provider working experience. Preserving the prevailing helpful relations with our prospects, we even now innovate our product lists the many time to meet up with the brand new wants and stick to the latest trend of this business in Ahmedabad. We're ready to facial area the difficulties and make the transform to grasp many of the possibilities in international trade.



  • http://hobbytownaustin.com/

    Tdizzy shows us how to paint a rc car body with spray cans. All the supplies in this video were purchased at HobbyTown Austin.

    flame mask – http://www.shopatron.com/products/category/Paint+Masks+-+1/10+Scale/137.0.1.1…

    http://www.rcracingusa.net/paintcan.htm

    The tool that you will need for this How To: 1. Liquid soap 2. Water 3. A pencil 4. A clean towel 5. Masking tape Use fresh tape 6. Xacto knife 7. Lexan paint 8. Permanent marker 9. Denatured alcohol (You can get this at any hardware store, usually in the paint section). 10. Steel wool, wet sanding paper, or a scotch brite pad 11. Unpainted Lexan body When you have all these tools you are ready to begin.

    Prepare the body for paint Wash the inside of the body with liquid soap and water. Then rinse off all the soap, and dry completely with a clean towel. Find the window masks that came with your shell and stick them on the inside of the body using the window lines as reference points. Firmly press down on the edges of the window masks with your finger nails to ensure no bleeding of the paint. Once the windows are masked off take the steel wool, fine wet sandpaper or scotch brite padand scuff the inside of the body until it becomes cloudy. This step will help ensure that the paint adheres to the body and wont be noticed after the body is painted. (If you are using chrome paint do not include this step, this will cause the chrome to have a brushed finish).

    Drawing the Design Draw the design on the outside of the body using the permanent marker, and place a strip of tape on the inside of the body over the area of your graphics, overlap the tape if one strip isnt enough for you design. Be sure to follow the shape of the body closely and that there is no air bubbles under the tape. Hold the body up to a bright light and trace the design on to the tape using a pencil. If this is your first time at graphics, keep it simple! With your Xacto knife, cut out the design you have drawn onto the tape. Take your time and experiment with the amount of pressure you need to apply to cut the tape, yet not mark the body! (Use scrap piece of Lexan with masking tape on them to practice). Tape off the rest of the bit you dont want painted and write in pencil what color you want it to be on the tape. Carefully seal the edges of the cut areas of your design using your fingernail, ensuring all edges are completely stuck to the body.

    Time to Paint Put the bottom half of the can of paint in to warm water first. This will make the paint spray more evenly and make it easier to stick to the shell. Paint the darkest color first because you dont want it to show through. Then spray the lightest last. Its best to spray three light coats, rather than two thick coats. This will reduce the chance of ugly bleeding, and paint flaking off in a crash! Peel off the masked portion for your next color and continue to paint each color, taking the necessary drying time between coats, back coats, and colors. If you are using light/metallic/candy colors then back these with silver or white to give the best finish, as to not let it be see through.

    Decorating it When all paint is dry, remove window templates and overspray film. Using denatured alcohol remove any over spray, residue and design sketches from the outside of the body. (You may omit this step, if your body came with a protective film coating)

    Final Touches Drill the body holes with a reamer or drill. Carefully trim the body edges a little at a time. Some people cut out the body after washing the body and before masking it. This is all up to personal preference.

    Final Tip You can improve the added durability of the paint job with a thin layer of Shoe-Goo on the inside of the body after the paint has set for at least two day.



    Contact: Mr Lewis
    Email: lewis@goodeggtraymachine.com
    Website: http://www.goodeggtraymachine.com
    Skype: lewis15863824208
    Mob:+86-15863824208
    QQ: 279684828
    Gtalk: lewis15863824208@gmail.com
    Yahoo Messenger:lewis15863824208@yahoo.com

    We are the professional manufacturer of Pulp moulding Machine and EPE Foam Extruder Line etc in China.
    This machine is a deeply processing equipment of EPE foam sheet/film products, mainly used for the tectorial surface of EPE foam sheet/film. The material can be PE film, plated Aluminum film plastic-coated. Paper plastic-coated fabric and so on.
    The machine can increase intensity, waterproof smooth of foam sheet, and can print character, picture, improving the products, is widely used for the packing of box lining, life vest, wooden floor cushion. Car Havelock, Motor adumbral cushion, electronic appliance, high-top china and so on.

    Applications:
    1) Cushioning and packaging materials for electronic equipment, potteries and
    glassware
    2) Construction-roof insulation, expansion joints, anti-vibration in roofs, walls,tunnels,
    bridges and highways
    3) Insulation of window, air conditioner ducting, industrial chillers, cold storage,
    refrigerated vans, industrial refrigerators and water pipes
    4) Education materials, decorative materials
    5) Sports mats, such as wrestling, judo, gym and exercise mats
    6) Body protective materials, such as helmets, leg and thigh guards, arm, elbow and
    shoulder pads, life saving jackets, and gloves
    EPE foam sheet machine can make different foam sheet width and thickness according to customer requirement.

    Meanwhile, it can also make foam pipe, foam net, foam rod, foam profile and so on through changing mould and machine parts.
    EPE foam sheet machine can make different foam sheet width and thickness according to customer requirement.

    Contact: Mr Lewis
    Email: lewis@goodeggtraymachine.com
    Website: http://www.goodeggtraymachine.com
    Skype: lewis15863824208
    Mob:+86-15863824208
    QQ: 279684828
    Gtalk: lewis15863824208@gmail.com
    Yahoo Messenger:lewis15863824208@yahoo.com

    We are the professional manufacturer of Pulp moulding Machine and EPE Foam Extruder Line etc in China.

    Related Products

    WhatsApp Online Chat !