Factory supplied wood grain edge banding Export to Mombasa

Short Description:

Wood grain 1.Type:PVC edging 2.Colors: solid color, unicolor,bicolor, wood grain, high gloss, matt finish, Smooth or Embossed Finish 3.Application: suitable for various furniture fittings with wide range of patterns, colors. Also applies to mdf,UV board, kitchen,cabinet, table, teaching equipment, laboratory, interior design and other construction decorations. 4.Material:PVC resin,Calcium Powder,DOP,CPE,ACR, titanium dioxide,gold oil,Back glue,Paraffins,UV,Stabilizer,and so on       5. Featur...


Product Detail

Product Tags

It adheres to the tenet "Honest, industrious, enterprising, innovative" to develop new products constantly. It regards customers, success as its own success. Let us develop prosperous future hand in hand for Reinforced Polyester Wear Strip For Food Machine Parts Factory , China Pvc T Molding Profiles Plastic T Edge Strip Factories , Electrical Flexible Large Plastic Trunks Factory , We have built a reliable reputation among many customers. Quality&customer first are always our constant pursuit. We spare no efforts to make better products. Look forward to long-term cooperation and mutual benefits!
Factory supplied wood grain edge banding Export to Mombasa Detail:

Wood grain

1.Type:PVC edging

2.Colors: solid color, unicolor,bicolor, wood grain, high gloss, matt finish, Smooth or Embossed Finish

3.Application: suitable for various furniture fittings with wide range of patterns, colors. Also applies to mdf,UV board, kitchen,cabinet, table, teaching equipment, laboratory, interior design and other construction decorations.

4.Material:PVC resin,Calcium Powder,DOP,CPE,ACR, titanium dioxide,gold oil,Back glue,Paraffins,UV,Stabilizer,and so on      

5. Feature: Pre-glued for easy operation, high quality back glue,Anti-dirt, Scratches resistance, UV resistance, Light stability ,chemical resistance,superior durability

6.Quality: 75% PVC percentage (PVC powder: calcium powder is 3:1); 80% PVC percentage(PVC powder: calcium powder is 4:1), they are all popular selling in customers, or higher quality we also produce for you, according to the requirement.

7.We can offer OEM,ODM service to content with your special requirements.

8.Free samples can be offered

 

 

Material

PVC, ABS or PMMA

Width

12~160mm, Customized sizes are welcome

Thickness

0.4~3mm, Customized sizes are welcome

Color

Solid, Wood Grain, High Gloss, Bicolor

Color Matching

96%-100% similar to your sample

Sun resistant Level

≥6

Tensile strength 

≥900 Mpa

Primer

Imported high quality primer

Packing

100m/roll, 150m/roll, 200m/roll, rolls in a carton. 

Customized design on carton is welcome

Certification

SGS, ISO9001

MOQ

3000 meters for each size

Price terms

FOB Shanghai or customized

Delivery time

10-15 days after receiving 50% deposit

Payment terms

T/T, WEST UNION,PAYPAL

Supply ability

10 containers each month

 


Product detail pictures:

Factory supplied
 wood grain edge banding Export to Mombasa detail pictures


We offer great strength in quality and development,merchandising,sales and marketing and operation for Factory supplied wood grain edge banding Export to Mombasa, The product will supply to all over the world, such as: Adelaide , Jamaica , Sierra Leone , To have much more enterprise. ompanions, we've got updated the item list and seek for optimistic co-operation. Our web-site shows the latest and complete information and facts about our goods list and company. For further acknowledge, our consultant service group in Bulgaria will reply to all of the inquiries and complications immediately. They're going to make their finest effort to meet buyers need. Also we support the delivery of absolutely free samples. Business visits to our business in Bulgaria and factory are generally welcome for a win-win negotiation. Hope to expertise a happy company co-operation perform with you.



  • Please find this product at http://absupply.net/
    This video is to bring you a closer look at the Pemko HSS2000xS88W roll of white colored smoke fire gasket seal. This is a special version, it is the HSS2000. That HSS2000 separates it from the standard S88W. The S88W is the typical bulb shape smoke and draft control sort of product, tear drop shaped. S88, in my experience is the part number synonymous with this type of material. The W means that it is white and is available in several different finishes. Lets talk about that first, black, clear, the dark brown, dark bronze color, gray, tan, and of course white. In addition to those different colors, different roll lengths are available as well. 18′, 20′, 21′, 24′, this is an 18′ roll. 18′ would be very typical for a 3′ x 7′ door even though it is one additional foot then you technically need, it would certainly do the job. This material is different from the S88 as we said earlier because it has this backer on it and I’m pulling a bit of it out from the packaging so that we can get a better look at it. This material has a graphite strip on the back of it. Lets get right to the heart of why this is different. This graphite strip on the back of it, which is what this graphite adhesive is applied to. The silicone is put down under that graphite in such a way that it is not removable without destroying it. It is permanently fixed to it. That feature makes this material significantly more durable in terms of a long lasting installation then the standard S88 alone. That is really very important where you have any sort of listed fire rated door opening which of course you would be using this material on. You see this very common, very often installed in hotel suite entry doors, that is where I see this constantly, this sort of material. This material because of its backer as well. It is tested and proven in positive pressure conditions to withstand both hot smoke and hot gasses resulting in longer integrity of the door assembly. Now, dimensionally, this material. That 1/2″ x 1/4″ that you see below the video there is an image below this video showing everything important dimensionally important about it. You have 1/2″ wide and that is extremely common, you’ve got a 1/4″ thickness, but that is the white bulb and there is 3/64″ thickness of the graphite, so keep that in mind when you are calculating your margin needed for that material. Now your typical S88, the silicone is so flexible that it can compress down to a near insignificant thickness, 1/16″. Pemko advertises that their S88 can compress down to margins as small as a 1/16″ between the door jamb and the door. Obviously you will need to allow for the thickness of the graphite. I would want to be in my typical 1/8″ range or gap of this material. I wouldn’t want to be anywhere beyond that, however any sort of binding on the door frame of this material is going to cause a problem of it remaining self-closing. I am going to put caliper on this to get an idea of how much it will compress down. Without really any damage, it will compress down to a 110 thousandths. So that tells me that without too much trouble an 1/8″ is going to be fine for that. If you are doing 3′ doors you will want to have your door at 35-3/4″ sort of door width. Installation of this material is really easy. No special tools are required; no special knowledge is required except what we are going to go over now. I’ve installed this material several times and would like to mention a few things about it. The installation instructions are packaged with the material and I want to go over that now. First of all, when you are done installing this material you are going to have a couple of labels. You are going to want to make sure that these labels are applied so that the inspector who will surely be inspecting the openings will know that the material is compliant with the listing requirements of the door. So, going over the instructions at this point. Like I said, I’ve installed this material and feel it is important to go over the instructions. First of all if you are installing the material, the frames got to be pretty much at room temperature. You are not going to install it on something at freezing material. Room temperature is what you are going to need to be, say between 50 and 100 degrees Fahrenheit and it is going to work in that range. Installation should take place after construction is completed, flooring is installed, and cleaning is completed. Here is the important part; paint on the frame must be cured for at least 5-7 days, very important. The paint cannot be wet underneath the dry surface when the gaskets are pressed on. If applying to a wood frame, the surface must be non-porous and sealed. Any questions on the HSS2000xS88W or any other Pemko product, please feel free to reach out to us.

    Related Products

    WhatsApp Online Chat !