China Rectangular NFT Channel FactoryPvc Hydroponic Water System for SalePvc Plastic Roller Shutter Doors For Steel/Wood Cabinet China ExporterRoller Shutter Door Cabinet for SaleU Molding Edge Strip China ManufacturerWholesale Plastic Glass Sealing Strip Exporter
Music video by Tekno performing Pana [Official Video]. MMMG
Repairing damaged edges on slab tables.
Slab tables are exposed to great strain during their use on site. The edges are usually the most vulnerable to damages from cranes and lifts or releasing.
With the Emplica repair strips system in combination with DB4XL router bit and edge router guide, repairing these slab tables is very easy and simple.
Restoring a sharp, durable edge is done in a few quick steps, as shown in our video.
Slab table with damaged edge
First, clean the damaged edge and make sure there are no screws, nails and rivets left in the plywood.
concrete residue will be removed during the cleaning process as well.
Now put the router guide into place and fix with spindle
Use the router along the guide with slow, controlled movements.
Always drive from left to right, if the routerguide is facing you. (because of the router bit’s clock wise turn)
The router guide will make sure the groove is right at the edge.
blow away dust and clippings
Use Glue (e.g. Emplica PUG PRO) very frugally and only into the edge, not the full flat surface.
Use a rubber hammer to gently fix the repair strip.
You may want to use a clamp to put on some pressure for 15-30 mins.
Remove excess glue after curing with a spatula
Seal the newly repaired edge
Orders and more information
or directly by email and phone:
phone: +41-763 83 35 22