factory Outlets for Solid edge banding for cabinet to Bahrain Manufacturers

Short Description:

Solid Color Description:   1.Excellent product quality : no bubbles , and smooth appearance and very good  flexibility. 2. Its performance will not change even the temperature is -25℃ or 400℃. 3.No whitish while trimming .  4.Any color is available 5.Appropriate for office furniture, household furniture, kitchen cabinet ….     Thickness 0.40mm to 3mm, customized sizes can be ordered Width 12mm to 630mm,customized sizes can be ordered Color Solid color, Two color, Wood grain ...


Product Detail

Product Tags

To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for China TPE/PE Wear Strips For Food Machine Parts Factory , China TPE/PE Wear Strips For Food Machine Parts Factory , PVC Slat wall Panel China Manufacturers , We will provide high-quality products and excellent services at competitive prices. Start benefiting from our comprehensive services by contacting us today.
factory Outlets for Solid edge banding for cabinet to Bahrain Manufacturers Detail:

Solid Color

Description:

 

1.Excellent product quality : no bubbles , and smooth appearance and very good  flexibility.

2. Its performance will not change even the temperature is -25℃ or 400℃.

3.No whitish while trimming . 

4.Any color is available

5.Appropriate for office furniture, household furniture, kitchen cabinet ….

 

 

Thickness

0.40mm to 3mm, customized sizes can be ordered

Width

12mm to 630mm,customized sizes can be ordered

Color

Solid color, Two color, Wood grain Color. We can also develop your customized designs and colors.

Surface Finish

Matt, Glossy, High Glossy, High Glossy with metallic spangles, with Smooth or Embossed Finish

Features

The product is made from PVC resin of the highly recognized brands. We have more than one thousand different colors and wood grain designs available to help you achieve different styles and coordinate different colors of your products. We are also capable of matching your required designs and colors according to the samples provided. The product is characterized by high wear resistance, color remaining the same as surface after trimming and polishing, and strong bonding strength.

MOQ

3000 m per color or as per request of customers

Packing

100m/roll, 200m/roll, rolls in carton, or according to your requirements.

Customized design, logo, words can be done on cartons, labels or products.

Delivery Time

2-3 weeks after receipt of payment.

Payment

T/T, L/C

Usage

It is used for furniture, wooden doors, cabinets etc.

Supply Capacity

4 containers per day, on-time delivery is guaranteed.

 


Product detail pictures:

factory Outlets for
 Solid edge banding for cabinet to Bahrain Manufacturers detail pictures


We have our own sales team, design team, technical team, QC team and package team. We have strict quality control procedures for each process. Also, all of our workers are experienced in printing field for factory Outlets for Solid edge banding for cabinet to Bahrain Manufacturers, The product will supply to all over the world, such as: Japan , Netherlands , Estonia , We attained ISO9001 which provides solid foundation for our further development. Persisting in "High quality, Prompt Delivery, Competitive Price", we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments. It is our great honor to meet your demands. We are sincerely expecting your attention.



  • Watch the full episode: https://www.youtube.com/watch?v=v-QEg8UCD8o

    This Old House general contractor Tom Silva shares expert tips and techniques for installing new kitchen cabinets. (See below for a shopping list, tools, and steps.)

    Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse

    Shopping List for How to Install Kitchen Cabinets:
    - Kitchen cabinets
    - 3-inch screws, to fasten cabinets to walls
    - Wood shims, for leveling and plumbing cabinets
    - 2×4 blocking, to secure peninsula or island cabinets

    Tools for How to Install Kitchen Cabinets:
    - 2-foot and 6-foot levels, for determining level and plumb alignment
    - Tape measure
    - Screwdriver, to unscrew doors
    - Cordless drill, for drilling holes
    - Impact driver, to drive screws
    - Utility knife, for trimming shims

    Steps for How to Install Kitchen Cabinets:
    1. Check the ceiling for level in two directions. If it’s out of level, find the low spot and use it as the measuring reference point.
    2. Measure down from the ceiling (or low spot) 33 inches in several places and mark the walls. These marks represent the bottom of the upper cabinets.
    3. Connect the marks with a long level and a sharp pencil to produce a level line along the kitchen walls.
    4. Mark the stud locations on the walls, then measure and transfer stud locations to the back of the upper cabinets. (If you prefer to proceed with one cabinet at a time, begin with the one that will hang in the corner of the kitchen, and continue with consecutive cabinets.)
    5. Pre-drill a screw-shank clearance hole through the cabinet backs at each stud location.
    6. Unscrew and remove the cabinet doors; place the doors in a nearby room for safekeeping.
    7. Hold the first wall cabinet in place in the corner of the kitchen. Be sure the bottom of the cabinet is even with the level line marked in Step 3.
    8. Drive one screw through the upper back of the cabinet and into the wall stud.
    9. Check the cabinet for plumb with a level. If necessary, slide shims behind the cabinet. Then drive in the remaining screws to secure the cabinet. Trim the shims with a utility knife.
    10. Repeat the previous six steps to install the rest of the upper cabinets.
    11. To prepare for installing the base cabinets, lay a 6-foot level on the floor in several places to identify the high spot.
    12. From the floor’s high spot, measure up 34½ inches and mark the wall.
    13. From that mark, draw a level line around the kitchen walls. This line represents the top of the base cabinets.
    14. Install the sink base cabinet first, centering it under the window.
    15. Drive shims under the sink cabinet, if necessary, to raise it flush with the 34½-inch reference line marked on the wall.
    16. Fasten the sink base cabinet to the wall studs with 3-inch screws. Before fully tightening the screws, slip a shim behind the cabinet to fill any void.
    17. Check the cabinet for level from front to back; slide shims under the front of the cabinet, if necessary, to level it. Trim the shims with the utility knife.
    18. Install the remaining base cabinets in a similar manner.
    19. To secure peninsula or island cabinets, screw 2×4 blocking to the floor. Set the cabinets over the blocking, then screw through the toekick and into the blocking.
    20. Cover the exposed end of the cabinets with a decorative panel. Drive in short screws from inside the cabinet.
    21. Install all the drawers and doors.
    22. Fabricate a filler strip to fit alongside the base cabinet that abuts the range. Fasten the filler by screwing through the cabinet face frame.
    23. Once the base cabinets are installed, make a template for the new countertop.

    Watch new episodes of Ask TOH: http://www.thisoldhouse.com/toh/tv/ask-toh/video/0,,,00.html

    Follow This Old House and Ask This Old House:
    Facebook: https://www.facebook.com/ThisOldHouse
    Twitter: https://twitter.com/thisoldhouse

    https://twitter.com/asktoh

    Pinterest: http://www.pinterest.com/thisoldhouse/
    G+: https://plus.google.com/+thisoldhouse/posts
    Instagram: http://instagram.com/thisoldhouse
    Tumblr: http://thisoldhouse.tumblr.com/

    Related Products

    WhatsApp Online Chat !