China Hydroponic Channel ManufacturersChina Plastic Roller Cabinet Shutter Door ManufacturersChina Wall Corner Guards PricelistLight Flexible Pvc Roller Shutter Doors For Furniture&Kitchen China ManufacturerPVC Extruded Data Strips FactoriesWholesale Plastic Clear PVC Data Strip for Sale
the 3D Acrylic PP ABS edge banding making machine is to produce the luxury Acrylic PP ABS edge banding .
3th installment on how to install Tufdek waterproof vinyl decking – installing flashing.
Before installing Tuf-Clad flashing it is recommended to plane or sand the deck edge, which allows the deck flashing to be level or lower than the deck surface. This helps to prevent water from damming against the flashing and backing up on the deck. You can see here that the flashing is flush with the deck surface and tilting towards the outside edge, which is optimal. This shows the Tuf-Clad flashing being trimmed to fit around the deck post and then nailed to the deck surface. We are using an air nailer with galvanized nails but you can use a hammer to do the same thing. The nails are applied close together to prevent any buckling or movement of the flashing due to temperature changes. Here the installer is welding small vinyl decking patch over the joint and the flashing to prevent water from getting through the flashing joint. This can be done with a hot air welder a Tuf-Weld liquid seaming cement. You can make the patches from scrap pieces of Tufdek vinyl decking. Apply a vinyl decking patch to all joints and corners of the PCV metal flashing. If there is a gap between the deck plywood and the house wall it is recommended to install flashing to help keep the vinyl decking from sagging into the opening. Here the installer is nailing galvanized flashing to cover the gap.
To find out more about our Tufdek waterproof vinyl deck flooring products visit our website at http://tufdek.com