factory customized Hydroponic PVC NFT Channel Export to Moldova

Short Description:

1.No soil is needed for hydroponics 2.The water stays in the system and can be reused – thus, lower water costs 3.It is possible to control the nutrition levels in their entirety – thus, lower nutrition costs 4.No nutrition pollution is released into the environment because of the controlled system 5.Stable and high yields 6.Pests and diseases are easier to get rid of than in soil because of the container’s mobility 7.It is easier to harvest 8.No pesticide damage 9.Plants gr...


Product Detail

Product Tags

Our goal is to provide high quality products at competitive prices, and top-notch service to customers around the world. We are ISO9001, CE, and GS certified and strictly adhere to their quality specifications for China Plastic Flexible Protective Corners Trim Manufacturers , Slat Wall Panel China Factories , Wholesale Extrusion Plastic Molding Hydroponic Channel Exporter , Welcome to visit us at any time for business relationship established.
factory customized Hydroponic PVC NFT Channel Export to Moldova Detail:

1.No soil is needed for hydroponics

2.The water stays in the system and can be reused – thus, lower water costs

3.It is possible to control the nutrition levels in their entirety – thus, lower nutrition costs

4.No nutrition pollution is released into the environment because of the controlled system

5.Stable and high yields

6.Pests and diseases are easier to get rid of than in soil because of the container’s mobility

7.It is easier to harvest

8.No pesticide damage

9.Plants grow healthier

10.It is better for consumption

 

Description:

Hydroponic growing system 

Size:

150*120mm, 120*100mm, customized

Material:

Environmental protection material of PVC

Suitable plant:

Leaf vegetables, like lettuce, spinage, lactuca sativa L, swamp cabbage, celery etc.

Feature:

Soil-less cultivation, Hydroponic

Installation:

Easy to Install, installation manual is available

Lead time:

7-15 days

M.O.Q.:

3000 meters


Product detail pictures:

factory customized
 Hydroponic PVC NFT Channel Export to Moldova detail pictures


We also offer product sourcing and flight consolidation services. We have our own factory and sourcing office. We can provide you with almost every type of product related to our product range for factory customized Hydroponic PVC NFT Channel Export to Moldova, The product will supply to all over the world, such as: Lyon , Russia , Zambia , Qualified R&D engineer will be there for your consultation service and we will try our best to meet your requirements. So please feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we will surely give you the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we will make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we are here to welcome your inquiries for any of our goods and service.



  • Clear labels are quite pricy but it’s possible to make your own at home using packing tape. It’s a really cool, inexpensive and simple DIY image transfer technique. I used black and white but it does work with color also. It can be used just like a clear sticker, with your own custom designs for pantry jar, spice containers, gift tags, on glass, plastic and wood.

    ❄ VERSION FRANCAISE (FRENCH) ➜ https://youtu.be/p-2OCBvbNb8

    Subscribe to Fixitsamo: https://www.youtube.com/subscription_center?add_user=fixitsamo

    All Videos Here: http://www.youtube.com/user/fixitsamo/videos

    Follow us on:
    Instagram: https://www.instagram.com/fixitsamo
    Facebook: https://www.facebook.com/fixitsamo
    Pinterest: https://www.pinterest.com/fixitsamo
    Tumblr: https://www.tumblr.com/blog/fixitsamo
    Google+: google.com/+fixitsamo

    Always happy to hear from you! Your comments, shares and all other interactions are very welcome.
    Thanks for watching!



    I needed a rig for overhead video production on my new electronics station, so I grabbed some LEDS and knocked it out in an afternoon!
    Subscribe to my channel: http://bit.ly/1k8msFr

    MORE DETAILS:

    http://www.iliketomakestuff.com/how-to-make-an-overhead-camera-rig

    ALSO CHECK OUT THERE OTHER RIGS:
    Darbin Orvar – https://www.youtube.com/watch?v=KQ4ORaQLx9g
    Casey Neistat – https://youtu.be/vb60rrtTddQ?t=292

    Special thanks to Jesse Hughson for his awesome support on Patreon! He made this video possible!

    MORE PROJECTS, POSTS AND EVENTS

    http://www.iliketomakestuff.com

    HERE’S WHAT YOU’LL NEED:
    http://amzn.to/1QbG0TW – Boom microphone stand
    http://amzn.to/1Uq7R8D – Gorilla pod (better deal)
    http://amzn.to/1L869i3 – Joby tripod head only
    http://amzn.to/1KTZHAq – MIG welder
    http://amzn.to/1UreqEG – Welding mask (auto darkening)
    http://amzn.to/1Dxukcc – Welding gloves
    http://amzn.to/1UreDYv – Welding magnet
    http://amzn.to/1gjdrqU – Angle grinder
    http://amzn.to/1T0GBNj – Cut off wheels
    http://amzn.to/1Uq7KKp – LED strip set
    http://amzn.to/1P9bHN6 – Soldering iron
    http://amzn.to/1hm39qY – Wire strippers (not the ones I have, but good ones)
    http://amzn.to/1eVTjKG – Thin solder
    http://amzn.to/1IoZ2TG – Solder tip cleaner
    http://amzn.to/1DtOnsn – Fiskars cutting mat

    Want to support ILTMS? Get early viewing, exclusive content and more…

    http://www.iliketomakestuff.com/patreon

    BUY A SHIRT, STICKER, PENCILS and MORE!!

    http://www.iliketomakestuff.com/store

    FOLLOW:

    http://twitter.com/iliketomakestuf

    http://instagram.com/iliketomakestuff

    http://facebook.com/iltms

    I used 3/4″ angle iron, 1/2″ square tubing, flat steel and solid rod.
    I measured four pieces of the square tubing to 18″ each.
    These were cut off with a cut off wheel on the grinder.
    I cleaned up the cut edges with a flat file.
    The 36″ angle iron are the verticals, the square tubing is for the horizontal support.
    I used magnets to hold the pieces at 90˚ angles.
    All four corners were welded together.
    I made a second, identical frame then smoothed all of the welds with a flap disc.
    I used a square file to smooth the inside corners.
    Using the magnets for support and squaring, I added another square tube (36″) in between the two frames. This will become the top, back side.
    I welded it in place. You could optionally add another support on the front side as well, but I didn’t find the need.
    I measured up 6″ from the back bar, and centered the steel rod on the marks.
    I welded the rod in place, making sure to get good penetration all of the way around it.
    I flipped the frame over, and added a piece of angle iron across the bottom, back side.
    All of the welds were smoothed with the flap disc.
    I sprayed the whole frame with flat black spray paint.
    For the over head mount, I used a $17 boom mic stand.
    I removed the bottom section as well as one of the cross bars.
    I added a rubber pad inside the section that fit around the rod, to help it hold tight.
    Then I mounted this on the steel rod in the frame.
    I used Joby tripod heads on all of my tripods. They have a smooth ball joint and are easy to move the camera between tripods.
    The thread on the mic stand is the same as the thread for the tripod head (how cool is that??).
    The camera slid right into place and locked into the tripod head.
    I got a 5000k˚ (color temperature) strip of LEDs, with a remote.
    These just plug together and work out of the box.
    The strip has an adhesive back, so it’s very easy to attach to the angle iron sides.
    There are marks ever few inches where you can cut the strip. There are re-solder terminals at these points.
    Once my strips were in place, I connected them by soldering on short wires to the provided terminals.
    Let there be remote controlled light!
    The color temp matches my other lights, but there are different options if you have a different preference.
    The light is pretty even from all directions.
    The steel frame keeps the footprint of the rig to a minimum, but helps it stay very sturdy and rigid.
    The boom arm gives you a huge amount of control over camera placement.
    The overhead shots turned out better than I expected!!
    The steel frame keeps the footprint of the rig to a minimum, but helps it stay very sturdy and rigid. Second channel: bit.ly/iltms-2

    Related Products

    WhatsApp Online Chat !