Factory Cheap price High gloss edge banding for furniture to Armenia Factory

Short Description:

High gloss: high gloss pvc edge banding  Materials: PVC, ABS, Veneer, melamine, etc.  Specifications: width 18mm~84mm  Thickness: 0.3mm~3mm high gloss pvc edge banding PVC edge banding is the most widely used edging product in the furniture industry with outstanding features of low cost, easy application, fantastic decoration, non-color variation after trimming and polishing, high flexible effects ,superior durability and wear ability, stain and chemical resistance, etc. We provides a wide ra...


Product Detail

Product Tags

All we do is always associated with our tenet " Customer first, Trust first, devoting on the food packaging and environmental protection for Decorative Wall Plastic Molding Profile China Factories , Wall Corner Guards China Factories , Rubber Edge Trim For Table China Exporter , We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.
Factory Cheap price High gloss edge banding for furniture to Armenia Factory Detail:

High gloss:

high gloss pvc edge banding 
Materials: PVC, ABS, Veneer, melamine, etc. 
Specifications: width 18mm~84mm 
Thickness: 0.3mm~3mm

high gloss pvc edge banding PVC edge banding is the most widely used edging product in the furniture industry with outstanding features of low cost, easy application, fantastic decoration, non-color variation after trimming and polishing, high flexible effects ,superior durability and wear ability, stain and chemical resistance, etc.

We provides a wide range of surface finishes for customers selection, including Matt finish, Gloss finish, High gloss finish, Embossed texture finish, etc 

 

We provides a wide range of surface finishes for customers selection, including Matt finish, Gloss finish, High gloss finish, Embossed texture finish, etc

 

 

Thickness

0.40mm to 3.0mm, customized sizes can be ordered

Width

12mm to 630mm,customized sizes can be ordered

Color

Unicolor, Two color, Wood grain Color. We can also develop your customized designs and colors.

Surface Finish

Matt, Glossy, High Glossy, High Glossy with metallic spangles, Smooth or Embossed Finish

Features

The product is made from highly selective PVC resin . We have more than one thousand different 

colors and wood grain designs available to help you achieve different styles and coordinate different 

colors of your products. We are also capable of matching your required designs, colors and quality 

standards according the samples provided. The product is characterized by high wear resistance ,

strong bonding strength, and color remaining the same as surface after trimming, polishing or bending.

MOQ

3000 meters per color or as per request of customers

Packing 

100m/roll, 200m/roll, rolls in carton, or according to your requirements.

Customized design, logo, words can be done on cartons, labels or products.

Delivery Time

10-20 days after receipt of 50% advance payment.

Payment

T/T, L/C

Usage 

It is used for furniture, wooden doors, cabinets etc.

Supply Capacity

4 containers per day, on-time delivery is guaranteed. 

 


Product detail pictures:

Factory Cheap price
 High gloss edge banding for furniture to Armenia Factory detail pictures


Quality comes first; service is foremost; business is cooperation" is our business philosophy which is constantly observed and pursued by our company for Factory Cheap price High gloss edge banding for furniture to Armenia Factory, The product will supply to all over the world, such as: Bahrain , Japan , Slovak Republic , After years' creating and developing, with the advantages of trained qualified talents and rich marketing experience, outstanding achievements were gradually made. We get good reputation from the customers due to our good products quality and fine after-sale service. We sincerely wish to create a more prosperous and flourishing future together with all the friends home and abroad!



  • This video will demonstrate how to apply Minwax Polyurethane to the replacement kitchen cabinet door which we stained in the prior video.

    Stained cabinet doors are porous and will absorb polyurethane. We’ll apply a thin, very light first coat of Minwax Polyurethane. This light coat will soak into the door and also dry significantly faster than a heavier coat.

    This first light coat should be applied with a fine natural-bristle brush. The natural-bristle brush will produce a finer finish than the foam brush, but at a higher cost.

    Many professional finishers use diluted polyurethane for the first coat, but simply taking care to apply a light coat of un-diluted Poly will work well too.

    Brushing should be in the direction of the replacement cabinet door’s grain using gentle, overlapping brush strokes.

    The desired amount of Poly on each coat will become evident in a short time. Too little Poly will produce dry spots, which can be seen by looking at the finish from differing angles, to change the light reflection.

    A coat of Poly that is too heavy will produce runs. The sweet spot is right between the two extremes.

    After each coat of polyurethane has dried, very lightly sand the surface of the cabinet door (in the direction of the wood grain) with sandpaper of 220 to 400 grit. You are only removing tiny bubbles or bumps, so be very careful and very lightly pass the sandpaper over the surface once or twice. You don’t want to sand through your newly applied Poly.

    After sanding remove any dust or sanding residue with a clean cloth.

    Now you are ready for your second coat. This will be applied in the same manner as the prior coat except a little thicker. Polyurethane is somewhat self-leveling, so cabinet doors finished while lying flat will have an advantage of this self-leveling flow.

    If you intend to apply a third coat then complete the light sanding and wiping process again. If this will be your last coat, then allow the Poly to set for about 48 hours and hang your new replacement cabinet doors.

    http://www.cabinetdoors.com

    Manufacturer of custom cabinet doors in hundreds of styles and 14 wood types.

    We have been making unfinished cabinet doors since 1980.

    We utilize modern computerized machinery and have made over 10 million cabinet doors for new homes in Canada, Mexico, and the United States.

    We make both Mitered and Traditional Cope & Stick cabinet doors for new homes and re-modelers, as well as home-owners.

    We make replacement cabinet doors in both arched and square designs and in over 300 different door styles.



    To see similar machines, stop by http://products.arpac.com/viewitems/shrink-bundling-multipacking/horizontal-shrink-wrappers

    The TS33CF is a continuous motion, side seal horizontal wrapper designed to package oversized retail items and industrial goods at speeds up to 60 packages per minute.
    The TS33CF utilizes up to 33” wide centerfolded polyethylene, polyolefin or PVC shrink film. With an oversized 28″ wide seal bar, the TS33CF wraps packages of infinite length and
    products up to 12” high with an easy-to-change product height adjustment system. A unique side sealing system provides close sealing proximity to the product being wrapped, keeping package graphics distortion-free. The sealer welds and then cuts the film, producing strong, attractive trim seals.

    FEATURES
    • Heavy-duty rugged tubular frame construction for high durability and around-the-clock operation
    • Laser cut and CNC machined components for maximum precision and strength
    • Powder coat finish that provides a durable scratch resistant surface and prevents corrosion
    • Allen-Bradley® PanelView 600Plus operator interface with color touchscreen, message display and self-diagnostics
    • Allen-Bradley® CompactLogix PLC
    • Digital counters and scales for easy and repeatable product setups
    • Guards and control box doors are electrically interlocked
    • 10′ flighted infeed with independent drive
    • Variable speed operation
    • Needle wheel film perforator
    • Quick change seal bar
    • Quick change seal height
    • Miser wheels
    • Missing product detection
    • NEMA 12 main electrical cabinet and controls
    • Driven cradle rollers for smooth film loading
    • Rapid hand wheel changeover
    • Evenly wound scrap removal system compacts excess film scraps
    • Central point lubrication simplifies preventive maintenance

    OPTIONS
    • Belted infeed
    • Extended flighted infeed
    • Random hole punch
    • Inverting head with film support guide
    • Infeed paper guides
    • Print registered film capability
    • Centerfolder to allow utilization of flat film (66″)
    • Right angle indexer
    • Customized infeeds available depending on application
    • Easy open film perforation system
    • 480VAC, 1 Ph, 60Hz, 6A

    APPLICATIONS
    • Shutters
    • Knock-down boxes
    • Desk pads
    • Oversize envelopes
    • Rugs
    • Bakery products
    • Artwork & supplies
    • Multipacks of facial tissue
    • Large toys & games

    Related Products

    WhatsApp Online Chat !