Easily take off stuck, stripped, or rusty skateboard truck hardware.
Go to http://ratvision.com/ for more info.
For great prices on Longboard and Skateboard equipment we recommend
Sometimes the mounting hardware bolts can strip or become stuck on a skateboard. Some people try to saw them off, but there is an easier way to remove stuck skate hardware quickly without causing any damage to the deck.
There are 2 different sizes for commonly used cross head or Phillips head screw drivers. Skate hardware requires a size number 2 screw driver or size 2 phillips head bit.
All you need is a screw/drill gun, a 5/32 drill bit, and a 3/16 drill bit.
Clamp or hold the nut on the end of the bolt. Drill into the head of the bolt about 1/8th of an inch using the 5/32 drill bit.
Using the 3/16 bit, drill into the hole you made using the 5/32 bit until the head of the bolt comes off.
If the head of the bolt is becomes stuck on the drill bit holt it with a pliers and twist the head off of the drill bit.
This method works for all skateboard hardware including street skateboards, downhill and longboard skateboards.
If you have any questions about this video or anything skate related send us a message through our channel. You can also find a lot more skateboard info at RatVision.com
Free Project Sheets and helpful info in the video description. Check it out.
In this video I show you how to add a brass inlay but you can keep it simple if you want and just leave it wood. I made a Tri-Force from the Legend of Zelda because it is fairly easy. There are two ways to add the brass. Solid sheets or brass powder. The solid brass I used is .016” thick. (see link below) You can go thicker even up to .026” or more, but I would not go much thinner thank .016″. The brass powder way is not as shiny but I encourage you to try both ways for the experience. You can add other designs or shapes, even small stones can be attached. I hope you get a chance to make a wood ring because it really is fun.
Free Ring Project Sheet 1 ► https://goo.gl/rwkOqD
Free Ring Project Sheet 2 ► https://goo.gl/Tu6Imn
MORE RING VIDS
My Ring Q&A video: https://youtu.be/A9cm4lUhdI8
My Wood Veneer test video: https://youtu.be/UE6Dj_sREi8
Short version of this ring video: https://youtu.be/-FqPVjfWql4
What you will need – Materials and Tools
Super Thin CA Glue: http://amzn.to/2dKYD6e
Wood ID Kit: http://amzn.to/2dExlz8
Brass Powder: http://amzn.to/2dKlGyA
Brass Sheet: http://amzn.to/2e6A7PW
Veneer Variety pack: http://amzn.to/2dGFPb9
My favorite veneer packs for rings:
Domestic Variety: http://amzn.to/2e4pxoo
You’ll also want a hobby knife set like one of these:
Simple & Cheap: https://goo.gl/blF1sl
Nicer to hold: https://goo.gl/fxl54k
Another option: https://goo.gl/4rrtqt
X-Acto brand: http://amzn.to/2dSQ2OB
Another kit: http://amzn.to/2e15hTr
More Links and Emails
Patreon : https://www.patreon.com/happyatom
My Tools : https://goo.gl/Htcck3
Help translate subtitles for HappyAtom:
Translate subtitles for this video:
Adam Hill – HappyAtom
PO Box 95278
South Jordan UT 84095
Thanks so much for watching and for all your support. I am super grateful to every one of you for watching, commenting, sharing and being the whole reason I upload these videos!