China Light Flexible ABS Roller Shutter Doors For Office File Cabinet SupplierChina Pvc Trunking SizeCounter-top Corner Protectors ManufacturersPvc Hydroponic Water System For Green Vegetable PricelistSlot Wall Panel Board China ManufacturerWholesale Cupboard Roller Shutter Supplier
Regular Meeting of the Thornton Marijuana Local Licensing Authority
To see the entire Marijuana Local Licensing Authority Meeting with agenda item jump to points visit:
How to Install Weather Stripping
See All Weather Stripping: http://www.canadiantire.ca/en/home/heating-air-conditioning/winterizing.html
You can keep out uncomfortable cold drafts and save on your heating bill by installing weather stripping on your door.
Here’s what you’ll need to do the job:
•a Drill with an assortment of bits
•a Phillips or flat head screwdriver
• or a multi-bit Screwdriver
…and your new door sweep
There are many types of weatherstripping available for doors.
We’ll install this vinyl sweep.
It’s 36 inches long so it can be cut to fit most doors.
Start by measuring the width of the door.
Transfer this measurement to the new sweep and mark it.
Use the scissors or utility knife to cut the rubber (neoprene) seal.
Then use the hack saw to cut it to length.
Hold the sweep against the door and mark where the screws will go.
Next, select a bit slightly smaller than the screws supplied, and drill pilot holes.
This is important, especially with a metal door.
Hold the door sweep in place and begin driving the screws. Don’t tighten them down just yet.
This sweep has slots for the screws rather than holes.
This allows you to adjust the height of the sweep to best cover the door opening.
Tighten all screws once the best seal has been achieved.
Operate the door a few times to check the seal, and your done!
You can get everything you need for keeping the cold out…
…at Canadian Tire