Excellent quality for pvc slotted mdf board to Brunei Factories

Short Description:

Description: 1.Easy assembling, easy operation, bearing and tightly. Reducing the workload of workers, saving installation costs. 2.Compatible with standard slatwall accessories. All kinds of specifications applicable to different product and market demand. 3.Good texture and matt effect. Smooth inner surface. 4.Strong and durable. Waterproof, scratch and corrosion resistance, surface scratch can be easily repaired. 5.Non-lead, Non-toxic pollution, not containing harmful substances like forma...


Product Detail

Product Tags

It is our responsibility to meet your needs and efficiently serve you. Your satisfaction is our best reward. We are looking forward to your visit for joint growth for China T Plastic Furniture Edge Trim Pricelist , Pvc Cable Trunking Size Pricelist , Wholesale Extrusion Plastic Molding Hydroponic Channel Exporter , Our aim is "blazing new ground, Passing Value", in the future, we sincerely invite you to grow up with us and make a bright future together!
Excellent quality for pvc slotted mdf board to Brunei Factories Detail:

Description:

1.Easy assembling, easy operation, bearing and tightly. Reducing the workload of workers, saving installation costs.

2.Compatible with standard slatwall accessories. All kinds of specifications applicable to different product and market demand.

3.Good texture and matt effect. Smooth inner surface.

4.Strong and durable. Waterproof, scratch and corrosion resistance, surface scratch can be easily repaired.

5.Non-lead, Non-toxic pollution, not containing harmful substances like formaldehyde, and so on.

6.Application:furniture making, such as shop fitting, display rack, storage cabinet, garage cabinet, hardware chain store, exclusive agent, exhibition, gallery, etc.

7.Good electric insulation, metal-free, and thermal stability.

8.Sound insulation, thermal insulation and stable performance.

Product  Specification:

Product PVC Slotted MDF Board
Size Custom as clients requirement
Thickness 15~25mm,thickness Tolerance,+/-0.2mm
Face/Back Melamine faced (one side or both side melamine faced), PVC,veneer,acrylic,fire-proof,UV
Surface Treatment Matt, textured, glossy, embossed or magic
Slot Style Ellipse, rectangle or trapezoid
Slot No. 7~21 slots or with one or two half slots on the side at your request
Slot Direction 2440mm direction or 1220mm direction
Accessory Aluminium alloy T-bar (0.5~1mm thickness) or PVC T-bar
Core Material Wood fiber (poplar, pine or combi)
Glue E0, E1 or E2
Grade A grade or as clients requirement
Density 730~750kg/m3
Usage & Performance MDF slatwall is widely used in supermarkets, shops, showrooms as shelves to hang and display small commodities. With good properties, such as easy fabricability, anti-static, easy cleaning, long-lasting and no seasonal effect.
  Standard export pallet packing
MOQ 1×20’FCL
Supply Ability 5000cbm/month
Certification ISO9001:2000,SGS

Product detail pictures:

Excellent quality for
 pvc slotted mdf board to Brunei Factories detail pictures


"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our company for the long-term to develop together with customers for mutual reciprocity and mutual benefit for Excellent quality for pvc slotted mdf board to Brunei Factories, The product will supply to all over the world, such as: moldova , Naples , Sheffield , Our qualified engineering team will usually be prepared to serve you for consultation and feedback. We are able to also deliver you with absolutely free samples to meet your needs. Best efforts might be made to offer you the ideal service and products. For anyone who is interested in our company and items, please make contact with us by sending us emails or contact us right away. In order to know our solutions and organization. ar more, you can come to our factory to determine it. We are going to usually welcome guests from around the globe to our corporation. o create small business relations with us. Please really feel no cost to speak to us for enterprise. nd we believe we are going to share the most effective trading practical experience with all our merchants.



  • I invented the Bow Blower, a combination of the bow drill and forge blower to make a device that can force air into a fire while being easy to construct from commonly occurring natural materials using only primitive technology. I began by fanning a fire with a piece of bark to increase its temperature. It is this basic principle I improved on throughout the project.
    Next, I made a rotary fan from two pieces of bark that slot together at right angles to each other to form a simple 4 bladed paddle wheel about 20 cm in diameter and 5 cm tall. The blades of the fan were not angled and were designed only to throw air outwards away from the axle when spun. The rotor of the fan was made by splitting a stick two ways so it formed 4 prongs. The fan was then inserted into the prongs and the end lashed to hold it in place. Spinning the fan rotor back and forth between the palms of the hands fanned the fire. But only some of the wind generated by the fan reached the fire. The rest of it was blowing in other directions, effectively being wasted.
    So I built a fan housing from unfired clay to direct the air flow into the fire. This was basically an upturned pot with a hole in the top, a spout coming out of the side. The housing was about 25 cm wide and 8 cm tall. The hole in the top and the spout were both about 6 cm in diameter so that the air coming in roughly equalled the air coming out. The base of the fan rotor sat in a wooden socket placed in the ground to make it spin easier and the top of the rotor protruded from the hole in the top of the housing.
    Now when the fan spun, air entered the hole in the top of the housing and exited the spout in the side. Importantly, it doesn’t matter which way the fan spins, air always goes into the inlet and out the spout. Air is thrown out towards the walls of the housing and can only leave through the spout while the vacuum in the centre sucks new air into the housing through the inlet. A separate clay pipe called a tuyere was made to fit over the spout to direct air into the coals. This was done because the pipe that touches the fire can melt away so it’s better to make this part replaceable.
    Instead of making a large wheel and belt assembly to step up the speed of rotation, I opted for a 75 cm long bow. I made a frame to hold the rotor in place consisting of two stakes hammered into the ground with a socketed cross bar lashed on to hold the top of the rotor. I made bark fibre cordage and tied the end to a stick. I then looped the cord around the rotor and held the other end in the same hand holding the stick. I then pushed and pulled the bow causing the rotor to spin rapidly, forcing air into the fire.
    I made a simple mud furnace for the blower. Then I collected orange iron bacteria from the creek (iron oxide), mixed it with charcoal powder (carbon to reduce oxide to metal) and wood ash (flux to lower the melting point) and formed it into a cylindrical brick. I filled the furnace with charcoal, put the ore brick in and commenced firing. The ore brick melted and produced slag with tiny, 1mm sized specs of iron through it. My intent was not so much to make iron but to show that the furnace can reach a fairly high temperature using this blower. A taller furnace called a bloomery was generally used in ancient times to produce usable quantities of iron and consumed more charcoal, ore and labour.
    This device produces a blast of air with each stroke of the bow regardless of whether it is pushed or pulled. The bow makes it possible to operate the blower without using a complicated belt and wheel assembly used in traditional forge blowers. There is a brief pause at the end of each stroke where the fan stops to rotate in the other direction, but this is effectively no different to the intermittent blast of a double acting bellows of Europe or box bellows of Asia. The materials used (wood, bark, bark fibre and clay) are readily available on most continents. No leather, valves or precisely fitted piston gaskets are required as with other types of bellows. The cords for this device wear out often so a number of back up cords should be kept handy for quick replacement. In summary, this is an easy to make device that solves the problem of supplying forced combustion air required for high temperature furnaces and forges.

    WordPress: https://primitivetechnology.wordpress.com/
    Patreon page: https://www.patreon.com/user?u=2945881&ty=h
    I have no face book page. Beware of fake pages.

    Related Products

    WhatsApp Online Chat !