China Rubber Seal ExporterChina Rubber Strip Door Seal SupplierPlastic Strip Doors ManufacturersT Plastic Furniture Edge Trim China ExporterT Pvc Cabinet Edge Trim China ManufacturersWholesale Rubber Weather Strip Supplier
Subscribe to http://CollisionBlast.com for more DIY and auto body and paint training.
One problem an auto paint shop faces when performing a car paint job is masking windshield molding. The molding fits tight against or even touches the painted surface, which causes clear coat to fill in the gap or crack between the molding and paint surface.
When the paint coatings are dried and the masking tape is removed, the clearcoat will have a rough edge.
There are several ways to avoid this in the paint shop. If the glass molding is soft and flexible enough a small diameter rope can be used by fitting underneath the molding.
3M makes a tape that can be used that lifts the molding as well.
In the video I will discuss these techniques so you can produce a well masked and clean car paint job
Be sure to subscribe to our YouTube channel. Also subscribe to our newsletter for hours of free training and upcoming auto body and paint training and news at http://CollisionBlast.com
Welcome to this ‘Teucer LED’ video on how to mount LED strip to aluminium profile and how to achieve linear effect.
For further information and full list of our LED products please visit https://www.teucerled.co.uk .
LS-5WW27K (19.2 W/m) https://goo.gl/IAbQBn
AL-1/1M (Aluminium Profile) https://goo.gl/lNSFb5
DIF-C/1 M (Clear diffuser)
DIF-F/1M (Frosted diffuser)
DIF-O/1M (Opal diffuser)
LS-3 + AL-2 (Aluminium Profile)
LS-4 + AL-6 (Aluminium Profile)