ABS/PVC Cabinet Roller Doors For Vertical Or Horizontal Open Of Steel/Wood Cabinet China SupplierExtrusion/Co-Extrusion Protection Rubber Seal Strip PricelistPE TPE PVC T Edge Trim ExporterPvc Slat Wall Panel for SalePVC/PP/PE/TPR TPE Tablet Plastic Rubber Corner Guards SupplierWholesale Pvc Plastic Roller Shutter Doors For Steel/Wood Cabinet Pricelist
Start at 11:00 if you want to avoid all the babbling!
See updates on my garden here: https://www.facebook.com/media/set/?s…
Here’s a link to the small pump: http://amzn.to/1a0p3LV
Find me on Facebook: www.facebook.com/dittobrooks
I got a phone call near the end of the video so the last part got cut off. Here’s the rest:
Tip for short people and tall Tower Gardens!! Why am I pumping out the water? Once every 2 months, remove the water from your Tower Garden and replace with fresh water and nutrients. If you do this faithfully, you’ll get larger and healthier plants. It takes less than 15 minutes per Tower and is so easy to do. Instead of attaching the clear tube that comes with the tower to the top, I pump out through the bottom instead with a separate pump. What I did is bought a small pump on Amazon with a long tube and I use that pump to pump out the tower instead directly through the square opening. I direct the water into my other garden beds. Here’s the link to the small pump that I’m using: http://amzn.to/1a0p3LV
I attach a hose to the pump and pop the pump into the reservoir. I’m doing this instead of attaching the clear hose that comes with the Tower to the top of the Tower. My Tower Gardens are very tall (taller than normal since I’ve added on) so this is kind of hard for me (I’m 5’4″). With three Tower Gardens, this is the simplest way for me to pump out the water with the least amount of hassle.
This is an aeroponic system. The plants grow strong, healthy, and are full of nutrients. It grows vegetables up to 40% faster! No gardening experience necessary. No weeding!
In this video I talked about how to wire manage your workstation, I also talk a little about Uninterruptible Power Supply or UPS, what they are and what they can do for you. I have done jobs for clients that require more detail and supply to wire manage their home entertainment systems or workstations. The zip tie/zip tie mount cost me 20$ and the 12 outlet power strip cost 22$. The UPS though not required for wire management is recommend for device/file protection. The UPS cost 180-200$ UPS seen in this video is the CP1500PFCLCD made by CyberPower. Remember that my workstation is different then yours and will require your unique touch.
And as always if you have any question please leave a comment or visit my Facebook page