11 Years Factory wholesale ABS high gloss edge banding for Greenland Factories

Short Description:

High gloss: high gloss pvc edge banding  Materials: PVC, ABS, Veneer, melamine, etc.  Specifications: width 18mm~84mm  Thickness: 0.3mm~3mm high gloss pvc edge banding PVC edge banding is the most widely used edging product in the furniture industry with outstanding features of low cost, easy application, fantastic decoration, non-color variation after trimming and polishing, high flexible effects ,superior durability and wear ability, stain and chemical resistance, etc. We provides a wide ra...


Product Detail

Product Tags

Sticking to the belief of "Creating products of high quality and making friends with people from all over the world", we always put the interest of customers in the first place for Waterproof Cable Trunking China Exporter , Wholesale Customized OEM Rubber Edge Strip Manufacturers , Pvc Slat Wall Panel Pricelist , We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.
11 Years Factory wholesale ABS high gloss edge banding for Greenland Factories Detail:

High gloss:

high gloss pvc edge banding 
Materials: PVC, ABS, Veneer, melamine, etc. 
Specifications: width 18mm~84mm 
Thickness: 0.3mm~3mm

high gloss pvc edge banding PVC edge banding is the most widely used edging product in the furniture industry with outstanding features of low cost, easy application, fantastic decoration, non-color variation after trimming and polishing, high flexible effects ,superior durability and wear ability, stain and chemical resistance, etc.

We provides a wide range of surface finishes for customers selection, including Matt finish, Gloss finish, High gloss finish, Embossed texture finish, etc 

 

We provides a wide range of surface finishes for customers selection, including Matt finish, Gloss finish, High gloss finish, Embossed texture finish, etc

 

Thickness

0.40mm to 3.0mm, customized sizes can be ordered

Width

12mm to 630mm,customized sizes can be ordered

Color

Unicolor, Two color, Wood grain Color. We can also develop your customized designs and colors.

Surface Finish

Matt, Glossy, High Glossy, High Glossy with metallic spangles, Smooth or Embossed Finish

Features

The product is made from highly selective PVC resin . We have more than one thousand different 

colors and wood grain designs available to help you achieve different styles and coordinate different 

colors of your products. We are also capable of matching your required designs, colors and quality 

standards according the samples provided. The product is characterized by high wear resistance ,

strong bonding strength, and color remaining the same as surface after trimming, polishing or bending.

MOQ

3000 meters per color or as per request of customers

Packing 

100m/roll, 200m/roll, rolls in carton, or according to your requirements.

Customized design, logo, words can be done on cartons, labels or products.

Delivery Time

10-20 days after receipt of 50% advance payment.

Payment

T/T, L/C

Usage 

It is used for furniture, wooden doors, cabinets etc.

Supply Capacity

4 containers per day, on-time delivery is guaranteed. 

 


Product detail pictures:

11 Years Factory wholesale
 ABS high gloss edge banding for Greenland Factories detail pictures


It adheres to the tenet "Honest, industrious, enterprising, innovative" to develop new products constantly. It regards customers, success as its own success. Let us develop prosperous future hand in hand for 11 Years Factory wholesale ABS high gloss edge banding for Greenland Factories, The product will supply to all over the world, such as: New Orleans , Congo , Vancouver , Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.



  • You can view photos of the porch that were taken March, 2013.

    http://s1281.photobucket.com/user/768kayshan/library/?sort=3&page=1

    It’s been almost 2 years, & this faux application has held up well to both weather & daily use.

    Think of this project as being like a texture paint application using a mix of vinyl concrete patcher & dye.

    Materials I Used:
    - Dust mask & gloves
    - Mixing buckets & spatulas/scrappers
    - Paint brushes (One extra soft bristle brush for cleaning off faux bricks/stone after peeling up tape).
    - Paint Stripper
    - Heavy duty power washer
    - Vinyl concrete patcher (this was the only type of concrete mix used for entire project)
    - Cement dye (Red, Buff, & Charcoal)
    - 1/2″ masking tape ( I found this tape at an auto body repair shop).
    - Concrete bonding agent
    - Concrete sealer
    - Heavy duty exterior white paint for the foundation & porch posts.

    Steps:
    - Apply paint stripper to loosen old paint on porch & then remove all old paint w/ a heavy duty power washer (I rented mine at Home Depot’s tool rental).

    - After porch is clean & dry apply the concrete bonding agent. Allow it to dry according to instructions on bottle.

    First Layer:
    - The first layer will become the color/texture of your faux grout lines. If you have a cement surface that is in good condition I would clean it, apply bonding agent, & after it is dry tape out the pattern for your brick or stone layer. In other words, your original surface will become your grout lines. If you have any cracks or slight dips you can repair them w/ this first layer application of vinyl concrete patcher. Vinyl patcher is stronger than regular cement & will maintain its strength w/ a layer spread as thin as 1/16″ thick(my personal experience w/ this product). Mix Vinyl patcher w/ water (follow directions on bag). The natural color of this product is light grey(or could also be white..so read the bag before you buy). No need to dye this first layer if you like its natural color for your grout..I didn’t dye mine. Apply a thin, smooth, flat layer, & allow to dry. Once dry, if you accidentally have any spots that are too high or pointy you can file them down w/ a cement grinder…but, overall, it may not be necessary since you should be able to blend in slightly high or pointy spots w/ your next layer of faux brick/stone.

    - Tape out any pattern you like.

    Second Layer:
    - Mix some vinyl patcher w/ whatever color dye you like. This will vary depending on what kind of stone/brick design you want on your porch. For example, I mixed one bucket of red dye & a separate bucket of buff dye for my bricks. I then scraped on a thin layer of red & then a thin layer of buff on top (or you can do vice versa), all while cement was wet..this mix of layering the two colors gave the bricks each their own individual & more natural look. Also, keep in mind that your wet cement will become several shades lighter after it dries.

    - Allow your cement to dry to a soft, dry, dough-like consistency.. something similar to a raw pie shell dough (If it’s too wet, too much of your cement will pull off w/ the tape. If it’s too dry, you’ll have a difficult time pulling the tape off). Gently & slowly pull up the tape, & gently brush away the little pieces of debris using a VERY soft bristle brush (invest in a well made soft bristle brush..cheap, rough, brushes will drop bristles in your work & may leave brush textures on your concrete).

    - Let your handy work dry over night..then apply a couple of coats of sealer to your entire project..make sure your sealer is specially made for fresh concrete work..some sealers can’t be applied until 90 days after your concrete cures. After 90 days, you can also apply a 90+ day sealer.



    To find out more about this property click:
    http://darlows.co.uk/DAR101609926 or contact Canton on 029 2 022 5551
    or E-Mail: canton@darlows.co.uk

    48 Brunswick Street CF5 1JL. We advise that an offer has been made for
    the above property in the sum of £149,950. Any persons wishing to
    increase on this offer should notify the agents of their best offer
    prior to exchange of contracts.

    Entrance Hallway
    Double glazed door to hallway with stairs rising to first floor and
    doors to

    Lounge 17′ x 15′ (5.18m x 4.57m)
    Double glazed window to front

    Dining Room 11′ x 10′ (3.35m x 3.05m)
    Double glazed picture window to rear

    Breakfast Room 13′ x 12′ (3.96m x 3.66m)
    Double glazed window to side and open to kitchen

    Kitchen 15′ x 13′ (4.57m x 3.96m)
    Range of wall and base units incorporating inset stainless steel sink
    unit with mixer tap and double glazed window to rear

    First Floor Landing
    Stairs rising to loft space

    Bedroom One 16″10″ x 15′ (40.89m x 4.57m)
    Double glazed window to front

    Bedroom Two 11′ x 11′ (3.35m x 3.35m)
    Double glazed window to rear

    Bedroom Three 9′ x 8′ (2.74m x 2.44m)
    Double glazed window to side

    Bedroom Four 6′ x 6′ (1.83m x 1.83m)
    Double glazed window to side

    Bathroom
    Panel bath, pedestal hand wash basin, close coupled WC and double
    glazed window to rear

    Rear Garden
    Enclosed rear yard with side access via roller shutter doors

    DIRECTIONS:
    From the office proceed in a westerly direction along Cowbridge Road
    East and turn left onto Theobald Road and Brunswick Street can be found
    at the end of the road on the right hand side

    Related Products

    WhatsApp Online Chat !