ABS/PVC Cabinet Roller Doors For Vertical Or Horizontal Open Of Steel/Wood Cabinet FactoryChina Black/White Wall Corner Protectors FactoriesChina T Plastic Furniture Edge Trim ManufacturersFurniture Corners Guards for SaleU Shape Molding Plastic Trip FactoryWholesale T-Shaped Plastic Edge Trim Strip Manufacturer
Submersible pump installation and repair. Do-it-yourself for a shallow (less than 75ft) well. Need some moderate upper body strength. A helper is nice to pull the pipe across the lawn as you pull it up. I just stopped twice and straightened it out. Obviously couldn’t video an pull pipe. (and not twist ties but zip ties) Special thanks to Robert English (who used to put in wells) for info and encouragement.
So this is pretty obvious! To put it back you leave the galvanized pipe attached! You feed the pipe back down the well, being careful not to twist the rope up. Make sure you know approximately where the hole the pitless fits into is located on the side of the pipe. The spring on the pitless will help push it against the side. MAke sure the stainless cable and the rope are within grabbing distance as you lower the metal pipe into the well. Put the metal pipe into the well up to the black tape mark. Then move it around until you feel the pitless go into the fitting in the side. Move the galvanized metal pipe around to make sure the pitless is secure. Fasten the rope to your pipe wrench or large screwdriver…just in case, and lay it over the 4″ pipe hole. Carefully unscrew the pipe from the pitless, hook up the electrcity, wrap wires with tape, pour 1/2 bleach down the well, and seal it! Turn on the breaker! DONE!
When it comes to the lockers in your employee locker room, you’ve had one of two options: painted or plain steel. And without a solution for the problems these lockers present: rust, chipped paint, and the accumulation of debris or chemicals — your business has likely been forced to deal with one of two consequences: You can replace these lockers year after year. Or you can have a locker room that just plain stinks.
That’s why CleanLockers™ were created. CleanLockers™ are the solution to every locker room mess in the food manufacturing industry for these simple reasons:
- Designed Specifically for Food Production Environments
- Quick Wash Down
- Galvanized Steel Construction
- Configurable for Food Production, Medical, Law Enforcement and Manufacturing Facilities